• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Adhesive for BBQ pig-tail flipper

Joined
May 28, 2015
Messages
1,554
Likes
178
Location
Bainbridge Island, WA
What adhesive would you recommend for a BBQ pig-tail flipper handle fitting? And how snuggly should the shaft fit in the hole (when hole is dry)? I bought one of these to fit up for a Christmas present. They indicate a 1/4" hole, which was 1/32th too small to even get the darned thing on. There's no ferrule, so seems hole needs to be just big enough, so as not to be ugly, in which case I'm concerned about there not being enough adhesive.

PS: I'm inserting it 7/8", and thought I'd rough that part of the rod with 80-grit sandpaper to help give it tooth.
 
Last edited:

hockenbery

Forum MVP
Beta Tester
TOTW Team
Joined
Apr 27, 2004
Messages
8,590
Likes
4,885
Location
Lakeland, Florida
Website
www.hockenberywoodturning.com
If the tool shaft is straight, I drill a hole the same diameter.
I generally use no adhesive if I'm keeping the tool. I bang the end of the handle on a bench to seat the tool. Most of my gouges are fitted this way and they rarely come loose. If I don't have a tighnfit or itmgets loose later, I add a few drops of thick CA to hold it and reseat the tool.
If the tool is going somewhere else I use thick CA when seating the handle.

If it is a tapered shaft, I use a Ferrel and undersize the hole. The diameter I use is diameter of the shaft that will be an inch inside the handle. Driving the handle on compreseses the wood for a tight fit.
Same rules for adhesive.

A BBQ Tool will like outlive its handle many time over.
A turning tool handle will likely outlive many tools
The CA will break Withna good whack to allow the handle to be replaced or reused with a new tool.
 
Last edited:
Joined
Aug 26, 2006
Messages
655
Likes
554
Location
Hampton Roads Virginia
I made five last year, gave four away and glad I kept one. Great reviews and I love mine. I made the big ones, used epoxy, probably 2 inches in the handle, dremal and cutoff wheel to scarify the shaft...Probably a little overboard but I could never forgive myself if a five pound brontosaurus steak ended up on the ground...
I'm sure the hole size was just enough to slip in with a bit of squeeze out...
 
Joined
May 28, 2015
Messages
1,554
Likes
178
Location
Bainbridge Island, WA
...Probably a little overboard but I could never forgive myself if a five pound brontosaurus steak ended up on the ground...
Hah! That's my approach.:D Thanks for the real-life advice. The person I'm making this for BBQ's all year round -- sun, rain or snow -- so I want it to be good.
 

john lucas

AAW Forum Expert
Joined
Apr 26, 2004
Messages
8,321
Likes
3,576
Location
Cookeville, TN
One thing I do when installing round rods in round holes using epoxy is to leave extra room so the hydraulic pressure won't push the rod back out. Another method I use is to drill a very small hole sideways through the handle into the hole you drill. When you push the rod in excess epoxy pushes out the small hole and seals it and at the same time relieves any pressure so the rod doesn't squirt back out. I just wipe off the excess epoxy with alcohol and when it dries you can hardly see the hole.
 

Bill Boehme

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Jan 27, 2005
Messages
12,884
Likes
5,168
Location
Dalworthington Gardens, TX
Website
pbase.com
One thing I do when installing round rods in round holes using epoxy is to leave extra room so the hydraulic pressure won't push the rod back out. Another method I use is to drill a very small hole sideways through the handle into the hole you drill. When you push the rod in excess epoxy pushes out the small hole and seals it and at the same time relieves any pressure so the rod doesn't squirt back out. I just wipe off the excess epoxy with alcohol and when it dries you can hardly see the hole.

There's also trapped air which acts like a spring and will push the rod back out. Scarifying the shaft as Clifton does helps to alleviate that problem. Also make the hole deeper than needed so that the excess epoxy has a place to go. There's no need to use a lot of epoxy, just enough to coat the contacting surfaces. If nothing else does, experience will teach you that it is better to put the epoxy down the hole rather than on the shaft. Don't ask how I know this and I won't tell any lies. :D
 
Joined
May 28, 2015
Messages
1,554
Likes
178
Location
Bainbridge Island, WA
I made five last year, gave four away and glad I kept one. Great reviews and I love mine. I made the big ones, used epoxy, probably 2 inches in the handle, dremal and cutoff wheel to scarify the shaft...Probably a little overboard but I could never forgive myself if a five pound brontosaurus steak ended up on the ground...
I'm sure the hole size was just enough to slip in with a bit of squeeze out...
Clifton, did you provide a loop (of leather, for instance) through a hole in the handle for hanging the flipper on a hook? Not sure whether most people would use that or not.
 

Mark Hepburn

Artist & Chef
Joined
Mar 26, 2014
Messages
1,621
Likes
577
Location
Houma, Louisiana
Jamie, lots of my buddies barbecue down here also and so do I. I agree with Clifton and John, and use epoxy. I also drew a TT hole in the side to let the air pressure out as I seat the rod.

Definitely on the lanyard. Makes it a lot easier to just hang it somewhere when you're smoking or grilling or whatever. It's going to be a very nice thoughtful gift that your recipient will love. I know everyone that I have given one to has really enjoyed it
 
Back
Top