• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Oneway 2436 lathe + extension + outboard + extras $5900 Texas

Status
Not open for further replies.
Joined
Jul 19, 2012
Messages
33
Likes
5
Location
Keller, Texas
For sale is a Oneway 2436 2 HP lathe in great clean little used condition with a 17" bed extension and 20" outboard turning accessory. All standard accessories provided with the lathe such as face plate, live and drive centers are included.
Also included are the following additional items:
Remote start/stop switch
33mm to 1-1/4x8 spindle adapter
Stronghold chuck with #2 and #3 jaws
Jacobs chuck with MT3 mandrel
6” tool rest
6” face plate (1 extra, one comes with the basic lathe)
4” face plate (2)

The lathe is a 1998 vintage but is essentially the same as current production. New list price for the lathe and all accessories is $8453. My price of $6200 $5900 is a savings of over $2250 $2550 off list and I have never seen Oneway discount their products.
The lathe is located in Keller, Texas just north of Fort Worth. This will have to be pickup only (unless you can provide other means) as I can not ship this 1000 pounds of iron. The sale is for all of the listed items as I will not break up the package.
Please contact me, Glynn Cox, at thumb9@verizon.net for any other information or additional photos.
DSC06396a.jpg DSC06399a.jpg DSC06400a.jpg DSC06407a.jpg
 
Last edited by a moderator:
Joined
Jul 19, 2012
Messages
33
Likes
5
Location
Keller, Texas
Tom,
I recently bought this lathe from an acquaintance who is moving, has not used the lathe for a couple of years and no longer turns. Since it is in such good condition I seriously considered keeping it as my primary lathe, but it is just too large for the type of turnings I do. I was even told I was crazy to sell it but I have my Powermatic 3520B setup just like I want with some personal modifications, so I will continue with it.
Also, after posting I noticed an error in the post heading. It is a model 2436 not 2432. I have not been able to figure out how to edit it.
 
Joined
Jan 24, 2010
Messages
3,058
Likes
900
Location
Cleveland, Tennessee
Glynn, that is a real bargain! Can't afford it or have the room for it but good luck in selling it.
 
Joined
Jul 19, 2012
Messages
33
Likes
5
Location
Keller, Texas
Doug, the basic lathe is 60". With the bed extension it is 79" and with the bed extension and outboard turning unit it is 102".
 
Joined
Jul 19, 2012
Messages
33
Likes
5
Location
Keller, Texas
Chuck,
There are ways... fly down, rent a truck.. I would put you up for the night. Or you could make a vacation of it to the Lone Star State.
Glynn
 
Joined
Jul 26, 2016
Messages
2,326
Likes
1,105
Location
Nebraska
UShip website is another option, independent freight haulers bid to haul your load from the material
location to your home or business. You can get pretty good deals and know what the cost is
prior to shipping.
 

Bill Boehme

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Jan 27, 2005
Messages
12,886
Likes
5,169
Location
Dalworthington Gardens, TX
Website
pbase.com
UShip website is another option, independent freight haulers bid to haul your load from the material
location to your home or business. You can get pretty good deals and know what the cost is
prior to shipping.

I read reviews for UShip online and they didn't look so good.. Most of the reviewers gave them one star.
 
Status
Not open for further replies.
Back
Top