• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Selling McNaughton Center Saver, Standard size

Status
Not open for further replies.

Bill Boehme

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Jan 27, 2005
Messages
12,886
Likes
5,169
Location
Dalworthington Gardens, TX
Website
pbase.com
Do you have the original design that has the T shaped gate or the Mark 8 design? What blades are included in your system? Do you know approximately how many years you have owned the system? The reasons for my questions are that McNaughton has evolved the design of the system over the years so blades aren't may not be exactly the same if someone currently owns a McNaughton system and wants to augment the set that they currently have. Also, depending on where you bought the set, it might not have included the straight blade along with the three curved blades.

I would recommend including either an email address or a phone number for people to contact you. The reason is that a lot of potential buyers may not be members of this forum.
 
Joined
Dec 11, 2016
Messages
7
Likes
1
Location
Billings, MT
Do you have the original design that has the T shaped gate or the Mark 8 design? What blades are included in your system? Do you know approximately how many years you have owned the system? The reasons for my questions are that McNaughton has evolved the design of the system over the years so blades aren't may not be exactly the same if someone currently owns a McNaughton system and wants to augment the set that they currently have. Also, depending on where you bought the set, it might not have included the straight blade along with the three curved blades.

I would recommend including either an email address or a phone number for people to contact you. The reason is that a lot of potential buyers may not be members of this forum.
Good questions, good advice. First time using the forum.
Bought the equipment from Craft Supplies about a year ago, with three blades, no straight blade. It just has a square gate, not at all like the one Mahoney uses. Assuming then it's the Mark 8 system but could go to jail for lying if it isn't. Contact me at buckarew4491@yahoo.com
 
Status
Not open for further replies.
Back
Top