• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Eucalyptus

Joined
Aug 1, 2015
Messages
136
Likes
522
Location
Iota, LA
Anyone have experience with turning eucalyptus. Friend of mine cut down what looks to be a nice size (12-14”) tree and offered it to me, should I go get it.
 

Attachments

  • 0D74D3F1-9685-4163-A4CC-495CE23A9CE9.jpeg
    0D74D3F1-9685-4163-A4CC-495CE23A9CE9.jpeg
    85.8 KB · Views: 58

Emiliano Achaval

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Dec 14, 2015
Messages
3,307
Likes
4,226
Location
Maui, Hawaii
Website
hawaiiankoaturner.com
There are over 100 species of eucalyptus here on the Island. Generally the ones with the type of bark that I see in your picture are good to turn. Looks like a Robusta species. They do tend to crack a little... very hard wood. I would turn it... Good luck
 

Bill Boehme

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Jan 27, 2005
Messages
12,886
Likes
5,169
Location
Dalworthington Gardens, TX
Website
pbase.com
There are hundreds of varieties of eucalyptus. Most have stringy or paper-like bark. Some of the best known varieties to woodturners are the Australian burls from the red mallee and brown mallee trees.
 

Emiliano Achaval

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Dec 14, 2015
Messages
3,307
Likes
4,226
Location
Maui, Hawaii
Website
hawaiiankoaturner.com
Joined
Aug 1, 2015
Messages
136
Likes
522
Location
Iota, LA
6352D332-18F4-4285-B5A5-7D5CE8251066.jpeg Well I turn my first piece of eucalyptus this week and boy does it warp and crack. This first pic was taken shortly after the first coat of walnut oil. 15” x4.5” 10BE5B36-1014-4D96-BC70-4084DE6F2F12.jpeg
This one is 24 hours later.. so I decide that I may have left the wall too thick,.45”, so I turn another piece. 14”x3 “ with .25 wall thickness sanded to 400 grit with no finish. Place in a sealed paper bag to dry. The following pi’s is after 3 days in a bagB2D5877B-C8A0-40D7-AAEB-6B6C04935B2B.jpeg


I have the rest of the tree cut in half logs and anchor sealed and will let dry a year or so before attempting to turn another bowl. Comments welcome,
 

Bill Boehme

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Jan 27, 2005
Messages
12,886
Likes
5,169
Location
Dalworthington Gardens, TX
Website
pbase.com
Turning it thinner means that it will warp more, but will be less likely to crack. If you want nice round bowls, you will need to twice turn them. The first time leave the walls extra thick ... I would think with eucalyptus it should be more than the normal 10% rule ... maybe 15% or even 20%. Then let dry for maybe a year before doing the final turning. Make sure to not have the pith in the bowl like the one in your last picture or else you will risk more warping and cracking.
 
Back
Top