• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Photo inlay in platter

Joined
Nov 1, 2011
Messages
37
Likes
5
Location
Salem SC
I would like to inlay a child's photo into the center of a small platter (coaster). How do I protect the photo from damage?
 

hockenbery

Forum MVP
Beta Tester
TOTW Team
Joined
Apr 27, 2004
Messages
8,590
Likes
4,885
Location
Lakeland, Florida
Website
www.hockenberywoodturning.com
The more advanced pen turners put photos around the barrels of pens and cast resin around them.

I think a clear epoxy could be poured over the photo. Something like crystal coat.
Tables are done this was all the time.

Be easy to test the process on a board.

Epoxy has the advantage of making the coaster water proof.
 

Emiliano Achaval

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Dec 14, 2015
Messages
3,307
Likes
4,226
Location
Maui, Hawaii
Website
hawaiiankoaturner.com
Put it behind glass. I don't think that you could encapsulate it in anything without ruining the photo.
Bill, I make fishing lures for my boat. The resin doesn't seem to ruin some of the inserts like shiny paper and other things. I even add a label from one of those labeling machines, the ink doesn't even run. I'm thinking a picture won't be damaged. Would have to try first...
 

Emiliano Achaval

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Dec 14, 2015
Messages
3,307
Likes
4,226
Location
Maui, Hawaii
Website
hawaiiankoaturner.com
The more advanced pen turners put photos around the barrels of pens and cast resin around them.

I think a clear epoxy could be poured over the photo. Something like crystal coat.
Tables are done this was all the time.

Be easy to test the process on a board.

Epoxy has the advantage of making the coaster water proof.
I should read the whole thread before answering.... LOL, yes, I believe that resin should work....
 
Joined
Nov 1, 2011
Messages
37
Likes
5
Location
Salem SC
Thanks for the replies. I looked up Crystal Coat and got several different hits including one that was for a finish you put on while on the lathe made by a maker of friction cost so that is probably not it. The other hit was for bar top coating by the gallon. Any tips for finding small quantities of a resin type product that is clear not yellow. Also thought I may try a spray contact glue to hold the photo and then top coat with a crystal clear acrylic. Any thoughts on this idea. Will report back on my results when done
 

hockenbery

Forum MVP
Beta Tester
TOTW Team
Joined
Apr 27, 2004
Messages
8,590
Likes
4,885
Location
Lakeland, Florida
Website
www.hockenberywoodturning.com
Thanks for the replies. I looked up Crystal Coat and got several different hits including one that was for a finish you put on while on the lathe made by a maker of friction cost so that is probably not it. The other hit was for bar top coating by the gallon. Any tips for finding small quantities of a resin type product that is clear not yellow. Also thought I may try a spray contact glue to hold the photo and then top coat with a crystal clear acrylic. Any thoughts on this idea. Will report back on my results when done
You want the bar type epoxy.
You might try the big box stores for a smaller quantity. I think they have something like a quart size.
 

john lucas

AAW Forum Expert
Joined
Apr 26, 2004
Messages
8,321
Likes
3,576
Location
Cookeville, TN
System 3 mirror coat I think you can get in smaller quantities from Woodcraft. Go to your local Hobby store and ask about Decopage clear finishes. I did Decopage using newspaper photos long before I was a photographer. Most epoxies won't damage a photo but some turn yellow with age. System 3 mirror coat is excellent. Casting resins also work well. There is also a way to remove the paper backing from photos and transfer the photo directly to the wood. it's pretty involved and tedious and you still have to coat it a clear protective coating.
 

Bill Boehme

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Jan 27, 2005
Messages
12,886
Likes
5,168
Location
Dalworthington Gardens, TX
Website
pbase.com
There are all sorts of photography print media so we need to clarify which kind works with a specific type of encapsulating material such as epoxy or Inlace.

These days most photo prints are produced on ink jet printers using dye based inks. The colors on this type of print will bleed at the drop of a hat if water or just about any solvent comes in contact with it. Prints made using high-end pigment based inkjet printers are much more resistant to bleeding. There are also high-end resin coated photo papers that seal the ink by chemical reaction to improve light fastness and bleeding (Ilford, Museo, Hahnemuhle, Moab, Harman). Prints made with commercial thermal photo printers are another type, but I don't know how they might react. I suspect that traditional photo prints made in the darkroom would work better than ink based prints.
 
Joined
Jul 20, 2010
Messages
47
Likes
55
Location
North Florida
Website
lindquiststudios.com
Dye-Sub on aluminum. Built to take a nook-u-lar hit. Can even be used as coasters. Adorama Prints or Bay Photo make them in many sizes and shapes.
Get the aluminum dye-sub print, inlay with epoxy - set it and forget it.
Clean with Windex.
 

Bill Boehme

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Jan 27, 2005
Messages
12,886
Likes
5,168
Location
Dalworthington Gardens, TX
Website
pbase.com
Dye-Sub on aluminum. Built to take a nook-u-lar hit. Can even be used as coasters. Adorama Prints or Bay Photo make them in many sizes and shapes.
Get the aluminum dye-sub print, inlay with epoxy - set it and forget it.
Clean with Windex.

Thanks for that great information, Mark. I have been looking for something like this for a graphic design that could be encapsulated and have the look of an enamel logo.
 
Back
Top