• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Useful shop gadgets.....shop, and "evolving shop" photos......

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
Useful shop gadgets. Shop, and "evolving shop" photos. Lathe tidbits.

Just thought I'd start a thread with photos of different shops, shop photos of "then and now"......along with photos of useful shop gadgets and lathe discussion. Any photos and/or "shop talk" is what's being sought in this thread......for general interest sake. Please feel free to participate.

===================================

This is a clean up dust pan that I've been using for a few weeks, and have been very impressed with it's usefulness in cleaning up my shop. It has a couple gallon capacity bucket and the long handle saves all that bending over I've been doing with a regular dust pan......I ain't getting any younger, and this is really helpful to me!

Update: April 14, 2013.......this huge scoop dustpan is fantastic! I'm using it all the time. odie

For years, I've also been using a garden rake and snow shovel for the really big piles of lathe shavings, but this new gadget is going to replace all that! It can set on the floor by itself while you sweep shavings into it.....as you sweep chips into the front with both hands on the broom. When the bucket is full, grab the handle and dump a couple gallons of chips into the trash can. This makes for fast work of the job.....

The bucket has a hinge on it, but I haven't seen the need for that feature yet......maybe someone else will find that useful. I keep it locked into place as shown.

It was purchased at Home Depot for $18.....wish I had something like this years ago.:cool2:

ooc
 

Attachments

  • IMG_0441.jpg
    IMG_0441.jpg
    540.7 KB · Views: 1,771
Last edited:

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
Here is "evolution" in progress!

This is a rolling cart I originally purchased around 2005, or so. It's intended purpose is for automotive use, holding tools while rolling up under the hood of a vehicle. I use it for lathe tool storage, lathe accessories, sanding supplies, etc.

The three photos show the evolution of this cart over the years, as it's been modified a number of times to better adapt to my needs. The added shelf holds my "sanding caddies", and the pvc tubes on the end hold cut sandpaper strips.

===================

This is intended to be a thread for discussing and showing photos of general tips and useful shop/lathe information, just for the fun of it. Any and all "shop talk" is welcome and promoted. :D

ooc
 

Attachments

  • Rolling tool cart.jpg
    Rolling tool cart.jpg
    119.7 KB · Views: 1,339
  • work area.JPG
    work area.JPG
    121.5 KB · Views: 1,324
  • IMG_0439.jpg
    IMG_0439.jpg
    513 KB · Views: 1,412
Last edited:

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
My Mother was a career school teacher, and this old paper cutter was given to me by her.....God bless her soul! It has been extremely useful to me for cutting sandpaper strips, and now I can't live without it! ;)

It's an antique and dated in the early 1950's.......1952, if I recall correctly.

I store 10-20 pre-cut sandpaper strips in the pvc tubes on the far end of the rolling mechanic's cart shown in the previous post.......

ooc
 

Attachments

  • Image053.jpg
    Image053.jpg
    320.9 KB · Views: 896
  • Image045.JPG
    Image045.JPG
    257.3 KB · Views: 1,047
Last edited:
Joined
Nov 26, 2011
Messages
138
Likes
8
Location
Rocky Mountain House, AB
Space saver.

Here is "evolution" in progress!

This is a rolling cart I originally purchased around 2005, or so. It's intended purpose is for automotive use, holding tools while rolling up under the hood of a vehicle. I use it for lathe tool storage, lathe accessories, sanding supplies, etc.

The three photos show the evolution of this cart over the years, as it's been modified a number of times to better adapt to my needs. The added shelf holds my "sanding caddies", and the pvc tubes on the end hold cut sandpaper strips.

===================

This is intended to be a thread for discussing and showing photos of general tips and useful shop/lathe information, just for the fun of it. Any and all "shop talk" is welcome and promoted. :D

ooc

Odie, I would like to show you a huge space saver for your saw top and benches. I made this up to put my tools in and keep them close.
It's basically a lazy Susan on growth hormones. The top turns free of the bottom. Both trays spin, so finding a tool is a snap. After putting your tools in in the order you like them, it becomes easy to remember where they are.
Details on how to make this are available...
 

Attachments

  • DSC01459.jpg
    DSC01459.jpg
    406.1 KB · Views: 1,259

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
Odie, I would like to show you a huge space saver for your saw top and benches. I made this up to put my tools in and keep them close.
It's basically a lazy Susan on growth hormones. The top turns free of the bottom. Both trays spin, so finding a tool is a snap. After putting your tools in in the order you like them, it becomes easy to remember where they are.
Details on how to make this are available...

Hi Syd........

I believe I've seen your "lazy Susan", or one just like it before. No doubt about it, that is one terrific idea, for sure. :D

The lazy Susan idea is something I might have done a few years ago, and if I was not already accustomed to the way I organize my tools the way I do. It's an idea that many other turners will benefit by considering it.....and using it. One very positive aspect of both yours and my methods is neither is in a place that isn't easily re-positioned if the need arises.......that is something others who permanently affix their tool storage to the wall, can't do very easily.

The way I organize my tools wasn't really a planned thing.......but, more of an evolutionary process for me. I have four places that I store tools......and their accessibility is a matter of how much any particular tool is used. Your method would undoubtedly be the best overall choice, if I were someone looking to find the right, or a better solution for that need. Since my solution works for me, I'm happy with it......but, there are many new turners who frequent these AAW forums, and the lazy Susan is a real good option to consider......thanks for introducing it to the thread.

I have four places of lathe tool storage. The Delta saw table top auxiliary table is where the tools currently in use are put. The rolling cart has tools that are frequently used, but not necessarily at the moment. The tools stored next to the 10" wet grinder (which I no longer use......it's been removed to clear the table top of needed space.....anyone want to buy that cheap?!) are tools that are used only occasionally. There is a little trough made from a lengthwise cut piece of pvc pipe right on the lathe bedways.....this is good for setting down a tool only momentarily while I do something else.

There is a drawer that holds about 25 tools that are almost never used. I might try to sell some of these someday. Some are well used, but some are nearly new.

Thanks for contributing to the discussion, Syd........:D

ooc
 

Attachments

  • IMG_0433.jpg
    IMG_0433.jpg
    513.4 KB · Views: 865
  • IMG_0439.jpg
    IMG_0439.jpg
    513 KB · Views: 836
  • Shop Nov 2011 (5).jpg
    Shop Nov 2011 (5).jpg
    219.4 KB · Views: 933
  • IMG_0440.jpg
    IMG_0440.jpg
    517.5 KB · Views: 994
Last edited:

Bill Boehme

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Jan 27, 2005
Messages
12,886
Likes
5,168
Location
Dalworthington Gardens, TX
Website
pbase.com
J.....This is a clean up dust pan that I've been using for a few weeks, and have been very impressed with it's usefulness in cleaning up my shop. It has a couple gallon capacity bucket and the long handle saves all that bending over I've been doing with a regular dust pan......I ain't getting any younger, and this is really helpful to me!...

.... but where is the ON-OFF switch and the power cord? :D
 

AlanZ

Resident Techno Geek
Joined
Mar 15, 2009
Messages
533
Likes
228
Location
Oradell, NJ
".... but where is the ON-OFF switch and the power cord?"

Bill, you're livin' in the past. Dust collection has evolved.

Odie got the new cordless model.

What I don't see, is the laser...
 

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
.... but where is the ON-OFF switch and the power cord? :D

".... but where is the ON-OFF switch and the power cord?"

Bill, you're livin' in the past. Dust collection has evolved.

Odie got the new cordless model.

What I don't see, is the laser...

You guys are a couple of cards! Heh,heh,heh! :D

The power cord is still there, just in a different location.......I opted out of the laser option when I got this one!

This Shop-Vac is a new addition to my shop. It replaced an old Craftsman shop vacuum I've had for about thirty years.......which died a few years ago. I got really tired of just cleaning up where a broom and rake could reach!

The broom and dustpan will probably never be replaced for the big piles of shavings........these are things that modern technology hasn't managed to replace on a layman's budget......yet!

Have a good day Gents.......and ladies!

Grab your cameras, and show us something neat about your shop..........! :cool2:

ooc
 

Attachments

  • IMG_0446.jpg
    IMG_0446.jpg
    516.8 KB · Views: 601
Last edited:
Joined
Feb 7, 2010
Messages
218
Likes
0
Location
Northern Kentucky,U S A
".... but where is the ON-OFF switch and the power cord?"

Bill, you're livin' in the past. Dust collection has evolved.

Odie got the new cordless model.

what I don't see, is the laser...

why use a laser when a remote control work better
 

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
Here are a couple of depth drills. I use these to drill a hole into the interior of bowl blocks, so that I don't get carried away and hog out the interior too deep. There are two sizes here......3/8" and 3/16" diameter drills.

The 3/8" hole is the best overall, because the bottom of the hole is better visualized while the wood is spinning. Both do, but the 3/16" hole tends to clog up more often, giving the false impression that the bottom of the hole has been reached, but hasn't. On some pieces, the smaller hole is the best option, but evaluation is necessary to determine that.

I have installed a steel rod perpendicular to the wooden handle of the 3/8" depth drill. After having the handle spin in my hands a couple of times, I decided to do this modification that allows a better two handed grip. Loosing control of the depth drill can happen with wet wood which creates wet shavings that can expand with heat and stick the drill solid. Since doing this modification, I've never had this problem again. I don't recall this ever happening with the 3/16" depth drill, but has happened on occasion with the 3/8" depth drill. The best way to drill is to drill down in increments, while backing out to expel the shavings built up in the flutes. Careful, not to back the drill all the way out, because re-entering a partially drilled hole can get a bit tricky with a hand held drill bit......

Conceptually, a depth drill is nothing new to the woodturning world. I realize, of course, that many other turners are using depth drills to indicate when to stop hogging out the interior of bowls........but, the wooden drill stop modification is my little invention! Drill stops are nothing new, but my way of doing it is unique to me. As you can see, I've used a large dowel section for the stop. I'm using a thumb screw hose clamp instead of the usual set screw. On the end of the dowel, I've cut an "X" pattern on the band saw......this allows for the wood to contract around the drill bit via the hose clamp, and locking it into place. (Using the standard set screw in the flutes will damage the flutes, and prevent smooth flow of chips through the flutes. Once or twice might not be that much of a consideration, but with a drill bit that uses a stop repeatedly, again and again, it will eventually become an issue.)

On the other end of the dowel, the wood is recessed at a 45 degree angle to the center hole. This allows for shavings to not interfere with the proper drill depth of the tool.

Recommended rpm is around 500-600 for drilling depth holes.

When necessary, these drill bits can be re-sharpened with a 600gt diamond hone. I wouldn't know for sure, but I'd imagine one of these long drill bits are good for a lifetime of use, used for a singular purpose like depth drill on bowls.......I've never needed to replace one, but I have re-sharpened a few times! :cool2:

ooc
 

Attachments

  • IMG_0443.jpg
    IMG_0443.jpg
    505.7 KB · Views: 1,028
Last edited:

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
The Versa-Cal calipers are very handy, because it only takes one hand to use them.

Like most of us, we've been using the double ended calipers for quite a few years, or decades. The trouble with standard double ended calipers is it takes two hands to use them. When I saw the Versa-Cal calipers first hit the market, I didn't know how well they would work. I decided to get the bigger version and try them out.......they work just as advertised, and being a "one handed" caliper was such an improvement, I was hooked on the concept!

I almost bought the smaller version of the Versa-Cal, but decided to try and convert my old style double ended calipers to work like the Versa-Cal. After the conversion, I am happy with how it works. It works just as well as the "store bought" item, and I saved myself some money by doing the conversion. I originally used two aluminum strips, but that didn't work out very well for my hand.......the bent aluminum rod was modified to adjust the width, and this was a success! Sometimes that's just the way things are......."If at first you don't succeed......try, try again!".......:D:D

The conversion is self explanatory, with the photo.

ooc
 

Attachments

  • calipers.JPG
    calipers.JPG
    215.1 KB · Views: 522
Last edited:
Joined
Oct 7, 2012
Messages
22
Likes
1
Location
Macomb county Michigan
The first two are some sanding sticks I made up for the bench jewelers course I took. They are scrap acrylic with assorted papers either glued or rubber banded to the sticks. Paint stirring sticks work well too.

The third photo is a toggle clamp that holds sheet metal or other sheet goods thin plastic, brass, aluminum veneer for segmenting pen blanks or cutting discs out of material. It will keep the figers from getting chewed up if the drill sticks in the material.

Fourth photo is deli waxed paper sheets good for glue ups, mixing small amounts of paint they come in a number of sizes and from 250 to 500 pcs. in the box. I get them at Gordon food service stores but any restaurant supply will have them.

The fifth one is some attachments for the shop vac from Lowes. Good for keyboards, computers and other limited access areas that could collect sawdust or other stuff
 

Attachments

  • WT01.JPG
    WT01.JPG
    72.6 KB · Views: 526
  • WT02.JPG
    WT02.JPG
    61.7 KB · Views: 471
  • WT05.JPG
    WT05.JPG
    72.6 KB · Views: 493
  • WT27.JPG
    WT27.JPG
    257.3 KB · Views: 472
  • WT070.JPG
    WT070.JPG
    89.2 KB · Views: 474
Joined
Oct 7, 2012
Messages
22
Likes
1
Location
Macomb county Michigan
Another useful item from the old hard drive.
First photo was a rare earth magnet glued to the bottom of the altoids tin to keep small bits and bobs handy near the machines.
Photo 2 is the hard drive magnets, #3 is some screwed to the peg board behind the lathe, holding drive centers and allen wrenches.
Photo 4 is a couple on a dust/shaving pick up.
Photo 5 on the lathe holds great and yet east to move with out tools.
 

Attachments

  • WT43.JPG
    WT43.JPG
    73.3 KB · Views: 367
  • WT18.JPG
    WT18.JPG
    72.1 KB · Views: 377
  • WT45.JPG
    WT45.JPG
    89.3 KB · Views: 371
  • WT48.JPG
    WT48.JPG
    117.8 KB · Views: 422
  • WT47.JPG
    WT47.JPG
    125.6 KB · Views: 464
Joined
Oct 7, 2012
Messages
22
Likes
1
Location
Macomb county Michigan
1st photo is is the round version of the cracker savers, they don't help much with keeping crackers fresh but the will keep the curd and dust off the drill chucks and other tooling and the come in square too. I put the cut up strips of sand paper in one.
2nd and 3rd photo's is a thread checker from ENCO, both metric and standard common sized fine and coarse threads. It will check nuts and bolts.
4th and 5th photos are what I did to get the spring clamps out of the way. some dowel stock/broom handle/pvc pipe some long screws short sections of pipe. screwed into floor/ceiling joists
 

Attachments

  • WT49.JPG
    WT49.JPG
    71.4 KB · Views: 474
  • WT074.JPG
    WT074.JPG
    77.1 KB · Views: 500
  • WT075.JPG
    WT075.JPG
    78 KB · Views: 443
  • WT109.JPG
    WT109.JPG
    104.8 KB · Views: 531
  • WT110.JPG
    WT110.JPG
    80.6 KB · Views: 545
Joined
Oct 7, 2012
Messages
22
Likes
1
Location
Macomb county Michigan
That why they are posted, will have to readjust some other photos so they fit this site.
Here are a couple more
1st Photo a shop made fence for the Royobi 9" band saw a cheap bar clamp that is screwed into place so the handle can tighten it to the table, Then a piece of wood is mounted to provide a continuous surface, if you will be using it a lot you can use some of that slide tape they sell.
2nd Is another view of the fence and my sliding table rig, 3rd is the blade slot.
4th is something that was on every hose of shop vacs. This one has a ring that you can use to adjust the amount of suction at the end of the attachments. Using the plaster sanding tank attachment requires a lower suction. If you put your own hole in a fitting you can cover it with duct tape to reduce the suction.
5th one are clearance sale poly cutting boards, a lot cheaper than the stock from WC or other suppliers.
 

Attachments

  • Bandsaw 9 in002.JPG
    Bandsaw 9 in002.JPG
    50.5 KB · Views: 442
  • Bandsaw 9 in003.JPG
    Bandsaw 9 in003.JPG
    80.3 KB · Views: 430
  • Bandsaw 9 in005.JPG
    Bandsaw 9 in005.JPG
    67.3 KB · Views: 402
  • WT21.JPG
    WT21.JPG
    58.4 KB · Views: 423
  • WT26.JPG
    WT26.JPG
    95.1 KB · Views: 410

Angelo

President Emeritus
Joined
Jun 14, 2004
Messages
399
Likes
110
Location
Lancaster, Pennsylvania
Website
www.majicbrand.com
Workspace

Attached are two photos of my 1224 workspace as it existed in my basement. It now resides in a rented Mill Space in pretty much the same form

I found that the 1224's top (beneath the ways) was too narrow for my purposes and way of working. So I built a little shelf to keep my tools from slipping off the lathe. The shelf also has some storage space for projects and a light

The wider shot shows the tool racks on the wall behind the lathe

Angelo
 

Attachments

  • DSC05656.JPG
    DSC05656.JPG
    60.1 KB · Views: 816
  • 1224 Workspace.JPG
    1224 Workspace.JPG
    60.2 KB · Views: 766

Angelo

President Emeritus
Joined
Jun 14, 2004
Messages
399
Likes
110
Location
Lancaster, Pennsylvania
Website
www.majicbrand.com
Just inspiration

Just a lot of inspiration from Lyle Jamieson. He called then "tolerations" when you just keep putting up with an inferior way of doing things.

I decided to organize my work space by eliminating "tolerations" My biggest pet peeve was having to move a tool or tools to get at the one I needed

The mantra was if I had to move one thing to get at what I needed I was not organized enough. So what you see is the result of a lot of trial and error over the course of years

Thanks for looking

Angelo
 

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
Just a lot of inspiration from Lyle Jamieson. He called then "tolerations" when you just keep putting up with an inferior way of doing things.

I decided to organize my work space by eliminating "tolerations" My biggest pet peeve was having to move a tool or tools to get at the one I needed

The mantra was if I had to move one thing to get at what I needed I was not organized enough. So what you see is the result of a lot of trial and error over the course of years

Thanks for looking

Angelo

Angelo......That "tollerations" concept is one I can completely understand. I work in an industrial shop environment, and I see first hand how other machinists organize their work space and tool boxes. It is possible to do good work with a disorganized work area, but those who do spend the effort to organize, waste less time over the course of the day. What I'm talking about here isn't "clean and neat"......I'm talking about an entire different thing: organization, and it looks like you've got a handle on that concept.

One thing that leads to organization is a little phrase composed of three little words......"do it now"! Apply them, and your shop will eventually work better for you than you ever dreamed was possible.

At one time or another, I'm sure all of us find ourselves saying to ourselves......"If I did this, then that task would be easier, and when I get around to it, I'll be sure to do that".

Great.......IF you do get that "round tuit".......none of us ever find all of the "round tuits" we should have......so, the concept is a bit faulty, at best!

"Do it now".......that's what works! :cool2:

Do it now, even if you have to break away from something else you are currently doing.......you'll get used to the inconvenience, and you'll also be thankful you did! ;)

DO IT NOW!......:D

ooc



edit: Even if you do get used to operating on the "do it now" principle, this doesn't mean you will do it in the best way, on the first attempt. You should also get used to the idea that, if it works, but could have been done a little better......just "do it now".....again......and again.....until you've got it perfected.

I know, I know......it's really frustrating to spend all that effort to do some little improvement in the shop, and it didn't work out as well as you had hoped for. Hey, that's just life, buddy!.......and, you need to understand that Edison didn't get the light bulb invented on the first try!!!!! You should also understand that Edison probably wasn't any smarter than you and I are........only, he didn't give up, and he worked on things over, and over, and over again......until he finally got it right! :D

ooc
 

Attachments

  • IMG_0450.jpg
    IMG_0450.jpg
    512.1 KB · Views: 540
Last edited:
Joined
Mar 25, 2008
Messages
298
Likes
243
Location
Suwanee, GA
Website
www.mikepeacewoodturning.com
Small depth drill

Here are a couple of depth drills. I use these to drill a hole into the interior of bowl blocks, so that I don't get carried away and hog out the interior too deep. There are two sizes here......3/8" and 3/16" diameter drills.

ooc

I tried longer depth drills until I saw Richard Raffan use a short one. Here is mine with a standard size 1/4" drill bit with a few notches to note depth. I use this for shallow bowls but mostly for doing boxes. Probably for 90% of my depth drill tasks. No ferrule since I don't put any lateral pressure on it. After your post with the yellow scoop from HD I went out and got one. Great idea Odie and thanks for sharing. I posted it in my chapter's newsletter.
 

Attachments

  • Depth drill_0471 (Small).JPG
    Depth drill_0471 (Small).JPG
    51.2 KB · Views: 336

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
I tried longer depth drills until I saw Richard Raffan use a short one. Here is mine with a standard size 1/4" drill bit with a few notches to note depth. I use this for shallow bowls but mostly for doing boxes. Probably for 90% of my depth drill tasks. No ferrule since I don't put any lateral pressure on it. After your post with the yellow scoop from HD I went out and got one. Great idea Odie and thanks for sharing. I posted it in my chapter's newsletter.

And, thank you as well for taking the time to input here, Mike........

The mental "gears" are turning! This is some of the information I was hoping to inspire with this thread......because you've just expanded my horizons just a little bit, and made me a little more versatile in my own shop! :cool2:

Note that my wooden depth stops are large enough to allow for a two-handed hold on the depth drill.......

I don't see why a short drill bit couldn't be used, and it may be preferable under some circumstances. As you can see, my 3/16" depth drill is made on a handled key-less chuck.......so, using it to adapt to a shorter drill bit would be a snap for me!

Without trying it first, it does seem like using some sort of positive depth stop would prevent any accidental variation in how deep the depth hole is drilled. The differences in wood density, and chip resistance in the flutes will undoubtedly cause a need for varying input pressures to do the actual drilling. By using a wooden spacer in conjunction with varying the drill bit within the chuck would allow for an accurate drilling at any prescribed depth.

As mentioned before, one thing that seems to be related to smaller diameter depth holes, is the hole itself tends to plug with shavings while the interior is being turned. When this happens, it does result in not positively seeing where the hole is while the lathe is in motion...........but, there is no reason why a larger 3/8" diameter, but smaller length drill bit couldn't be used in exactly the same way.......:)

I'll give this a try......

Thanks.......:D

ooc
 

Attachments

  • IMG_0443.jpg
    IMG_0443.jpg
    505.7 KB · Views: 246
Last edited:

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
Here is another "evolving shop" photo of my work bench.

These two photos span a decade, or very close to it.....

The one on the right was taken yesterday, and the one on the left was taken nine years ago. There is a huge difference here, but probably I am the only one who notices all the subtle changes........:D

ooc
 

Attachments

  • work bench 2.jpg
    work bench 2.jpg
    138 KB · Views: 585
  • IMG_0459.jpg
    IMG_0459.jpg
    534.8 KB · Views: 595

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
Here is some "evolving shop" photos of my lathe.

These also span a decade. The biggest difference is the addition of variable speed, but there are many changes over this time period.

I also took a shot of some "up and coming" bowls that are awaiting wax and polish. A few of these you'll probably eventually see in my gallery.

Later, friends........:D

ooc
 

Attachments

  • Woodfast lathe.jpg
    Woodfast lathe.jpg
    111.8 KB · Views: 411
  • IMG_0460.jpg
    IMG_0460.jpg
    523.4 KB · Views: 438
  • IMG_0452.jpg
    IMG_0452.jpg
    523.9 KB · Views: 528

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
In your third pic, the leftmost piece looks particularly fine,Odie.

Thank you, Grant........

Sometimes Mother Nature plays a leading role in the effort........and she did in that Claro Walnut burl bowl. Matter of fact, that one was a real headache to complete successfully. There were some gaping cracks in the bowl blank, and that radically inward turned rim was a result of eliminating the flaw.

:D

ooc
 
Joined
Dec 29, 2007
Messages
64
Likes
6
I've filed a notch in the top center of my #1 scroll chuck jaws. When I mount a piece, I put a pencil mark there. It makes for a deadly accurate index for remounting.

Side note, the red rubber on the shark jaws is what is left from dipping the jaws in that liquid rubber they use to coat tools. I thought it would minimize marking the piece. As I recall it worked pretty well on expansion, not so well on contraction.
DickHob
 

Attachments

  • JawNotchB.JPG
    JawNotchB.JPG
    100.9 KB · Views: 425
  • JawNotchA.JPG
    JawNotchA.JPG
    93.7 KB · Views: 432
Joined
Mar 20, 2009
Messages
207
Likes
1
Here is another "evolving shop" photo of my work bench.

These two photos span a decade, or very close to it.....

The one on the right was taken yesterday, and the one on the left was taken nine years ago. There is a huge difference here, but probably I am the only one who notices all the subtle changes........:D

ooc

That's to bad Odie but it isn't anything a coat of light colored paint wouldn't
help.
 

Bill Boehme

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Jan 27, 2005
Messages
12,886
Likes
5,168
Location
Dalworthington Gardens, TX
Website
pbase.com
Here is some "evolving shop" photos of my lathe.

These also span a decade. The biggest difference is the addition of variable speed, but there are many changes over this time period......
Later, friends........:D

ooc

You have a time clock in your shop?? Do you punch in and out to record your shop time? Do you dock yourself for missed time?

Other than that, I can't tell any difference between the two pictures. :D
 
Last edited:

Bill Boehme

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Jan 27, 2005
Messages
12,886
Likes
5,168
Location
Dalworthington Gardens, TX
Website
pbase.com
Here is another "evolving shop" photo of my work bench.

These two photos span a decade, or very close to it.....

The one on the right was taken yesterday, and the one on the left was taken nine years ago. There is a huge difference here, but probably I am the only one who notices all the subtle changes........:D

ooc

I see one change -- a new ghetto blaster.

But, also it looks like the same roll of paper towels that was there ten years ago is still there. :D
 
Joined
Oct 12, 2008
Messages
143
Likes
0
Location
The Adirondacks
There's one huge difference I see that I've also made. There's lots more stuff on the shelves, but more importantly things are no longer stored in opaque containers but in see-though plastic boxes. In my old shop I had a destructive temperature-humidity problem, and now everything is in stackable plastic food storage containers. Probably not necessary in Texas, but it saved my butt when I accidentally knocked over the shelves the tools and supplies were on.
 

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
That's to bad Odie but it isn't anything a coat of light colored paint wouldn't
help.

Hello Bart.......

Painting the walls and ceiling white is one thing I wish I had done when I built this shop.

ooc

There's one huge difference I see that I've also made. There's lots more stuff on the shelves, but more importantly things are no longer stored in opaque containers but in see-though plastic boxes. In my old shop I had a destructive temperature-humidity problem, and now everything is in stackable plastic food storage containers. Probably not necessary in Texas, but it saved my butt when I accidentally knocked over the shelves the tools and supplies were on.

Yeah, John........

Those clear plastic containers are a great way to organize, and also see what's inside without having to look! I started using those a few years ago, and now there's a bunch of them in my shop. I also got rid of the metal Folgers coffee containers and now store things in the red plastic Folgers containers.......what the heck, these are FREE, and the lids on the new plastic containers work much better than the lids that used to be on the metal coffee cans! :D

ooc

You have a time clock in your shop?? Do you punch in and out to record your shop time? Do you dock yourself for missed time?

Other than that, I can't tell any difference between the two pictures. :D

A time clock to punch in and out?????

Bill, you must be talking about this picture with the used wooden bowl waste block made into a clock face, with only the hour hand.

Actually, that's on a magnet attached to an automatic lawn watering timer. I have the power to the lathe and compressor on a timer, so that I don't forget to switch them off when I leave the shop.......just a little back-up memory, since I'm very forgetful about these things. :eek:

If the knobs on the Minarik controller are not completely turned off, extended time with power remaining on could damage the unit.......and, there are air leaks in my air lines that cause the compressor to start up and stop every few hours. I'd rather not have that happen, unless I'm physically present.

The clock face is my reminder of what time I've set the timer to cut the power. Here, it's 2:30am.......

ooc
 

Attachments

  • IMG_0450.jpg
    IMG_0450.jpg
    512.1 KB · Views: 219
Last edited:

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
Here is a little thing I've done that is quick and easy.......

I've put some scribe marks on the closest bedway that are exactly perpendicular to the axis of the lathe. This allows me to align a straight tool rest to the foot, or face of a bowl when I want to get it positioned as perfectly square as I can.

Simple really.......Just visualize the tool rest by eye from above, just prior to locking it down. This helps, but from this point forward, it's up to you to make that cut square to the axis of rotation.

I have a carbide scribe that I made from a used "throw away" metal lathe cutting tool. I scrounged this from my place of work.......we throw away many of these carbide cutters when they are used beyond practical application. I used the scribe, along with a machinist's square on the inside of the bedways to make the markings. The markings are made more visible by using a Sharpie marker on the scribe mark.

This modification does not effect banjo movement, or it's secure lock-down.

ooc
 

Attachments

  • IMG_0466.jpg
    IMG_0466.jpg
    498.7 KB · Views: 448
Last edited:

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
Here is some "evolving shop" photos of the grinders I've used for sharpening lathe tools. The 6" 3450rpm grinder was originally purchased early in the 1980's, and was my first grinder. I used to sharpen tools on this grinder using the originally supplied platform.......what a crude way to grind, as I look back on this.

The 6" grinder was originally set up for the Wolverine around 1991 or 1992 as best I can recollect. This photo was probably taken around 2005, or so. The wheels were 80gt Norton SG wheels, and worked very well. I still have this grinder, but is now used as a general purpose grinder.

The Delta 8" slow speed grinder was purchased around 2008, and has been a great boon to my turning efforts. The Norton 80g SG wheels were working so well, that I decided to equip the 8" grinder with the same set of wheels. I wish I hadn't waited so long to upgrade from the 6" grinder, but I suppose my stubbornness is why I didn't do it sooner!

There are two photos of the Delta 8" grinder. The first photo was shortly after purchasing it, and the next photo was taken a few days ago. There has been so many upgrades to the way my tool sharpening efforts has progressed, that it's hard to recount all the things I've progressed through, in order to arrive at this photo......:)

ooc
 

Attachments

  • 6 inch grinder.jpg
    6 inch grinder.jpg
    98.1 KB · Views: 362
  • Delta 8in slow speed grinder.jpg
    Delta 8in slow speed grinder.jpg
    122.4 KB · Views: 380
  • IMG_0469.jpg
    IMG_0469.jpg
    510.3 KB · Views: 405

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
Here is a handy little gadget for the lathe that I'm constantly using. All it is is a piece of scrap lumber that has a proper sized wedge base to fit between the bedways.

Well, what in the world is it? :confused:

It's just something to whack your gouge on when shavings get stuck in the flute and obstruct your view of the cutting action. When this happens, give your gouge a little whack, and you're back in business in a millisecond!

On the bottom side, I've hot glued a couple of magnets, and this allows me to store it to the right side of my controller box, and out of the way when I'm not using it.

Using it on the lathe has been so handy for my purposes, that I eventually got a bright idea......it naturally fit the same purpose at the grinder. You'll see a small block of wood attached to the right side of the grinder base, in-between the base and the Wolverine V-arm jig lock down mechanism. When metal powder clings to the bevel and flute.......same thing.......just give it a little whack, and the metal powder is gone!

These "tool whackers" can be made in about ten minutes......and, the time spent is well worth the effort I invested in making them! :D

edit: I suppose I should note that the wooden block only works well when working with dry, or semi-dry wood. For the hardened crud left by very wet wood, the "gouge whacker" may not do the trick. When it doesn't, use a brass barbecue grill brush to remove built up crud in the flute......brushing from inside the flute towards the cutting edge. With heat and wet shavings, sometimes even the grill brush isn't aggressive enough.......and, in that case, I have a specially re-shaped steel bar (made from an old screwdriver) that can remove the toughest of hardened residue in the flute. When worse comes to worse, and I resort to the altered screwdriver, I also re-sharpen the gouge immediately afterwards.

ooc
 

Attachments

  • IMG_0448.jpg
    IMG_0448.jpg
    522.4 KB · Views: 458
  • IMG_0464.jpg
    IMG_0464.jpg
    518.8 KB · Views: 427
  • IMG_0463.jpg
    IMG_0463.jpg
    515.9 KB · Views: 418
  • IMG_0469.jpg
    IMG_0469.jpg
    510.3 KB · Views: 394
Last edited:

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
Getting a nice steady hold on a power sander is darn near an impossibility when it's hand held.

This little platform is adapted to fit between the bedways. It's quick and easy to make, and it's easy on and off. It gives a solid and steady resting place for your hand while sanding. After having used it for several years, it's something I just couldn't live without! :cool2:

I have two sizes of "riser blocks" to use in conjunction with the platform, and the six different heights available covers virtually any sanding situation.

Not only is the sanding platform used for power sanding, it's a boon to hand held sandpaper, as well......your fingers will be mighty glad you have this!

Not much to say about it......very simple, simple to make, but major advantages to your convenience and style.

ooc
 

Attachments

  • IMG_0470.jpg
    IMG_0470.jpg
    521.6 KB · Views: 343
  • IMG_0471.jpg
    IMG_0471.jpg
    520.4 KB · Views: 344

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
The "evolving shop".......

This Craftsman 2hp 20gal compressor served me well for 20+ years.......and, was still running fine when I sold it. The trouble with such a small tank, is whenever I needed a constant supply of air for air powered tools and chip removal, the darn thing ran constantly......all that constant noise was challenging my sanity! For what it was, I thought highly of it, though.

I replaced the Craftsman compressor, with this Campbell-Hausfield 80gal, 4hp Husky Pro about five years ago. What a difference! It was difficult to justify the purchase......but, like all things of this nature, once the cost is absorbed, the damage to your wallet is never given a second thought.........and happiness about what you've been able to acquire, and what it can do for you is the whole point. :D

ooc
 

Attachments

  • Sandpaper storage and 2HP compressor.jpg
    Sandpaper storage and 2HP compressor.jpg
    146.6 KB · Views: 242
  • compressor  80gal 4hp.jpg
    compressor 80gal 4hp.jpg
    96.1 KB · Views: 237
Last edited:

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,074
Likes
9,475
Location
Panning for Montana gold, with Betsy, the mule!
More of the "evolving shop"..........

Having a little removable platform for the lathe is a really handy thing.

My "working platform" started out as just a flat sheet of plywood, and that was good......but, it has evolved into something better......much better!

Added are a couple of cradles for close quarters drill/sanders a few years ago. What an improvement that was! :D

ooc
 

Attachments

  • Image028.JPG
    Image028.JPG
    272.4 KB · Views: 377
  • IMG_0467.jpg
    IMG_0467.jpg
    519.2 KB · Views: 406
Back
Top