Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
We just finished moving the forums to a new hosting server. It looks like everything is functioning correctly but if you find a problem please report it in the Forum Technical Support Forum (click here) or email us at forum_moderator AT aawforum.org. Thanks!
Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
Congratulations to Dave Roberts for "2 Hats" being selected as Turning of the Week for April 22, 2024
(click here for details)
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Palm "wood" is a difficult material to work with, consisting of sponge and wire. I used most of a two-oz. bottle of thin ca glue to hold the roots together and harden the rest of the surface. I also spent a band saw blade cutting through the roots. The final shaping was done with 36-grit paper by necessity, then sanded through the grit sequence to 600. A thin piece of persimmon (a remnant of the glue block) was left on the foot. All comments welcome.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.