• We just finished moving the forums to a new hosting server. It looks like everything is functioning correctly but if you find a problem please report it in the Forum Technical Support Forum (click here) or email us at forum_moderator AT aawforum.org. Thanks!
  • Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Dave Roberts for "2 Hats" being selected as Turning of the Week for April 22, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

heater

  1. John Torchick

    Electrical question for heater

    My shop is very cold. Right now, two 110V 1500W heaters take about two hours to bring the temp from mid 50s to about 66-68 degrees. Looking for a 240V electric heater of about 4800-5000W to heat about 350 SF. Heaters spec to 400 SF. Plug-in units have the #6-30NEMA plug. Plug has two horizontal...
  2. John Torchick

    Woodturning on hold for now

    It is beastly cold here in SE TN. Outside, it is now 30 degrees and the shop is at 42 degrees. I put an electric heater in the shop and it only raised the temp to 50 degrees in about two hours! Shut it off. I have a second electric heater but I have to turn off the heater in the den so it...
Back
Top