• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

McNaughton center saver

Status
Not open for further replies.

Bill Boehme

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Jan 27, 2005
Messages
12,886
Likes
5,169
Location
Dalworthington Gardens, TX
Website
pbase.com
You can get a longer post (about 6"} from Craft Supplies for about $20 if you have a larger lathe such as a Robust AB or Oneway 2436. I got the longer post for my Robust, but actually the shorter post could be used for light duty coring.
 
Joined
Dec 21, 2013
Messages
17
Likes
16
Location
Jackson, GA
You can get a longer post (about 6"} from Craft Supplies for about $20 if you have a larger lathe such as a Robust AB or Oneway 2436. I got the longer post for my Robust, but actually the shorter post could be used for light duty coring.
I may have to my lathe is a powermatic 4224 ,
 
Status
Not open for further replies.
Back
Top