Can a Nova DVR user tell me if it is possible to lower the speed below 100 rpm? Seems with the electronics it should be possible. For some sanding I'd like to slow way down.
Thanks.
Thanks.
-
We just finished moving the forums to a new hosting server. It looks like everything is functioning correctly but if you find a problem please report it in the Forum Technical Support Forum (click here) or email us at forum_moderator AT aawforum.org. Thanks! -
Beware of Counterfeit Woodturning Tools (click here for details) -
Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details) -
Congratulations to Dave Roberts for "2 Hats" being selected as Turning of the Week for April 22, 2024 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Nova DVR speed
- Thread starter Wells Jacobson
- Start date
Not on the DVR-XP (almost 10 years old) I have
Disappointed. Bad planning at the manufacturing end for something quite basic. Thanks for the response.
- Joined
- Apr 27, 2004
- Messages
- 8,638
- Likes
- 4,978
- Location
- Lakeland, Florida
- Website
- www.hockenberywoodturning.com
You might contact Technatool.
http://www.teknatool.com/support/index.htm
They have a support center in Tampa and they have supported the local clubs
They might have a solution and are certainly interested in solving problems.
http://www.teknatool.com/support/index.htm
They have a support center in Tampa and they have supported the local clubs
They might have a solution and are certainly interested in solving problems.
Thank you. Will do.