I have developed a method of turning a sphere that makes it easy. Took ideas I found on the web and expanded on them. The process can be seen at http://www.turningaround.org/HTMLPages/turning_a_sphere.htm . Comments welcomed.
-
We just finished moving the forums to a new hosting server. It looks like everything is functioning correctly but if you find a problem please report it in the Forum Technical Support Forum (click here) or email us at forum_moderator AT aawforum.org. Thanks! -
Beware of Counterfeit Woodturning Tools (click here for details) -
Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details) -
Congratulations to Dave Roberts for "2 Hats" being selected as Turning of the Week for April 22, 2024 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
turning a sphere
- Thread starter akransom
- Start date
Very creative; thanks for sharing the idea.
I haven't been able to figure our what a "hormonal" line is but I think I can duplicate your process without defining that term.
I haven't been able to figure our what a "hormonal" line is but I think I can duplicate your process without defining that term.
That comes into play when turning a femishpere.
Ed
Ed
Nice method
Think I have notes somewhere on five different ways to make a sphere.
Now it can be expanded to six.
Thanks.
This is something I'd like to try.
but will be interesting to see if my limited slow speed will be safe and comfortable.
T-Bird
Think I have notes somewhere on five different ways to make a sphere.
Now it can be expanded to six.
Thanks.
This is something I'd like to try.
but will be interesting to see if my limited slow speed will be safe and comfortable.
T-Bird
When I try to connect to the video I get a error message?
Yeah, the link appears to be broken. akransom can you fix it?
Metal or wooden rings of different sizes for different size spheres simplify checking the curve one is cutting. Held against a sphere that is not correctly cut, they will rock. Simply make corrections until they don't rock.
Malcolm Smith.
Malcolm Smith.
what is up with the link?
What is up with this link? I won't work for me either.
What is up with this link? I won't work for me either.
Sphere
Try this link by none other than one of our board members, Al Hockenberry: www.detroitareawoodturners.org/SphereDescription.pdf
Try this link by none other than one of our board members, Al Hockenberry: www.detroitareawoodturners.org/SphereDescription.pdf
Last edited:
Thanks for the link, Kurt. But we still don't have Art's (akransom) technique bolted down, do we?
Malcolm, templates don't seem particularly revolutionary. Is that all there is to it?
Joe
Malcolm, templates don't seem particularly revolutionary. Is that all there is to it?
Joe
My post could have been clearer. The inside diameter of the ring should be less than the diameter of the piece one is turning so that it can be held against it. A template would be the size that fits over the turning. If one has a few rings of different sizes, one can start out with a ring that is something like a third or a quarter the diameter. One will quickly find oneself reaching for the right size: the size that quickly shows the error in the curve one is producing. It will rock if the curve is not correct
Malcolm Smith.