wtb a thin parting tool
Hi Carlos,
If you don't locate one from your post, effective and inexpensive thin parting tools are easy to make from 6" reciprocating saw blades. Use a grinder to get rid of the saw teeth, put a parting tool profile on the end, and then mount/epoxy it into some sort of handle. I believe there have been instructional posts here on the forum on how to make one. If you choose to make your own, my warning is to not use a long blade that will extend the cutting end much more than 3" from the tool rest. If it extends much more than that you can lose support or go too deeply into the work-piece so that it will too easily bind in the kerf.