• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

DIY CARVING JIG

Joined
Oct 1, 2008
Messages
705
Likes
1,124
Location
Sydney Australia
Carving jigs for the most part were not quite what I wanted. So I came up with the idea of using a towing ball, they are readily available in hardware and auto shops. It's a fairly simple device that locks from underneath with a simple screw set up, fully rotatable, and can swing off the perpendicular about 130°, and the flat base is rotatable allowing the jig to be swung out in any direction, nothing really fancy but does all I need.

IMG_2964.JPG


IMG_2954.JPG
 
Joined
Dec 5, 2015
Messages
724
Likes
342
Location
Seattle, WA
Hughie,

Nice work. I have a similar type jig. Mine is a slight modification of yours. The slot cut into the top allows it to swivel more than 90 degrees. It might need a little stiffening on the side opposite the slot.

carving stand.JPG
 

Lance Mirrer

AKA "taxman"
Joined
Dec 4, 2006
Messages
314
Likes
83
Location
Cooper City, FL
Website
taxmancpa.com
Carving jigs for the most part were not quite what I wanted. So I came up with the idea of using a towing ball, they are readily available in hardware and auto shops. Its a fairly simple device that locks from underneath with a simple screw set up, fully rotatable and can swing off the perpendicular about 130' and the flat base in rotatable allowing the jig to be swung out in any direction, nothing really fancy but does all I need.
How did you adapt the ball screw to your chuck threads? Thanks,
 
Joined
Jan 8, 2022
Messages
1
Likes
0
Location
Southport, NC
Has anyone tried the Panavise 300? Is it beefy enough? Price is right. Wouldn’t be too hard to adapt a chuck adapter to 1” rod.

(On Amazon)

PANAVISE 300 Standard Base​


PANAVISE 300 Standard Base


 

Lance Mirrer

AKA "taxman"
Joined
Dec 4, 2006
Messages
314
Likes
83
Location
Cooper City, FL
Website
taxmancpa.com
Has anyone tried the Panavise 300? Is it beefy enough? Price is right. Wouldn’t be too hard to adapt a chuck adapter to 1” rod.

(On Amazon)

PANAVISE 300 Standard Base​


PANAVISE 300 Standard Base


Hi Fred,
Heard very good things about these. Obviously for smaller chucks and carvings. I have one but haven't attempted asking it to hold up a Vicmark.
 

Tom Gall

TOTW Team
Joined
Feb 20, 2013
Messages
956
Likes
1,761
Location
Hillsborough, NJ
Master artist, woodworker, and woodturner Jerry Bennett shows an interesting carving jig made from a bowling ball. He made a shop tour video on YouTube and shows the bowling ball carving jig at about 15:45 of the video. I can see many adaptions for this including use of vacuum ... which may be over the top for this application. :D

View: https://www.youtube.com/watch?v=KGiD27q2iRc
 

Lance Mirrer

AKA "taxman"
Joined
Dec 4, 2006
Messages
314
Likes
83
Location
Cooper City, FL
Website
taxmancpa.com
Master artist, woodworker, and woodturner Jerry Bennett shows an interesting carving jig made from a bowling ball. He made a shop tour video on YouTube and shows the bowling ball carving jig at about 15:45 of the video. I can see many adaptions for this including use of vacuum ... which may be over the top for this application. :D

Jerry Bennett tour.
Wow! Hadn't heard of Jerry Bennett before, but his shop tour was incredible. Going to look up the AAW story to read more about him.
 
Joined
Oct 1, 2008
Messages
705
Likes
1,124
Location
Sydney Australia
Hughie,

Nice work. I have a similar type jig. Mine is a slight modification of yours. The slot cut into the top allows it to swivel more than 90 degrees. It might need a little stiffening on the side opposite the slot.

View attachment 45802
i have a slot in mine as well just didn't show it, my top plate is what they call gauge plate, high carbon steel. It's 10mm thick and this one has been in service for maybe 10 years no problems to date.

carving jig 011.jpg
 
Joined
Oct 1, 2008
Messages
705
Likes
1,124
Location
Sydney Australia
How did you adapt the ball screw to your chuck threads? Thanks,
turned the tow ball down to 20mm dia and welded a chuck adapter I had to it
 

Attachments

  • carving jig close up012.jpg
    carving jig close up012.jpg
    356.4 KB · Views: 15
Joined
Oct 1, 2008
Messages
705
Likes
1,124
Location
Sydney Australia
Wow! Hadn't heard of Jerry Bennett before, but his shop tour was incredible. Going to look up the AAW story to read more about him.
A little big for me, but its essentially the same as a tow ball set up. All mine are mounted on either of my two lathes the mounting allows for height adjustment as well as the rest of the movement
 

Emiliano Achaval

Administrator
Staff member
Beta Tester
TOTW Team
Joined
Dec 14, 2015
Messages
3,307
Likes
4,224
Location
Maui, Hawaii
Website
hawaiiankoaturner.com
Hi Emiliano,
How does the Vermec compare to Trent Bosch's stand? Do you know if the Vermec has a bench attachment (their web site didn't mention) and is there a US distributor (WW Emporium doesn't appear to carry)?

Thanks!!!
I'm not familiar with Trent's one. I should be able to find it on YouTube. I buy direct from Enzo Verrechia. His daughter Nadine provides great customer service. Even with the shipping, it is often cheaper than buying it here. I have also bought my last few chucks direct from Vicmarc; Victor is a super nice guy. I will ask Nadine if there is a bench attachment.
 
Joined
Nov 18, 2012
Messages
642
Likes
1,776
Location
Torrance, CA
Master artist, woodworker, and woodturner Jerry Bennett shows an interesting carving jig made from a bowling ball. He made a shop tour video on YouTube and shows the bowling ball carving jig at about 15:45 of the video. I can see many adaptions for this including use of vacuum ... which may be over the top for this application. :D

Jerry Bennett tour.
Not to hijack this thread but what an amazing artist Jerry Bennett is! Of course he would never say that; he’s as genuine as they come!! Nice share Tom!!
 
Joined
Oct 1, 2008
Messages
705
Likes
1,124
Location
Sydney Australia
I'm not familiar with Trent's one. I should be able to find it on YouTube. I buy direct from Enzo Verrechia. His daughter Nadine provides great customer service. Even with the shipping, it is often cheaper than buying it here. I have also bought my last few chucks direct from Vicmarc; Victor is a super nice guy. I will ask Nadine if there is a bench attachment.
Emiliano, I find the more varied the mounting for your carving jig the better, if you can mount the jig in many places it gives much greater flexibility to the jig. Especially when doing small finely carved boxes, I find sitting down makes life much easier as they do take much longer to finish.
 
Joined
Nov 4, 2011
Messages
495
Likes
744
Location
Bay Settlement, WI
Got lucky. While we were having this conversation a Trent Bosch Carving stand showed up on e-bay, at a very reasonable price. Should be here any day now.
I got one several years ago ... you're gonna love it!
 

Lance Mirrer

AKA "taxman"
Joined
Dec 4, 2006
Messages
314
Likes
83
Location
Cooper City, FL
Website
taxmancpa.com
so close, yet so far. Received the jig and it has a 1-1/8" post. My Powermatic needs a 1" post.
My search continues...
Haven't searched yet, but anyone know what lathes use a 1-1/8" post?
 
Joined
Jun 6, 2018
Messages
1,948
Likes
996
Location
La Grange, IL
@taxman , I wonder if the post can be swamped out, and if Trent can sell you a 1"? Might still be cheaper in the long run.

Also, you could mount the carving on to a workbench, or make your own bed mount.

 

Lance Mirrer

AKA "taxman"
Joined
Dec 4, 2006
Messages
314
Likes
83
Location
Cooper City, FL
Website
taxmancpa.com
@taxman , I wonder if the post can be swamped out, and if Trent can sell you a 1"? Might still be cheaper in the long run.

Also, you could mount the carving on to a workbench, or make your own bed mount.

The threaded head is interchangeable for others (I have the 1-1/4"x8) but the post is welded. Have the bench mount so I can use it, just not on the lathe banjo.
 

Lance Mirrer

AKA "taxman"
Joined
Dec 4, 2006
Messages
314
Likes
83
Location
Cooper City, FL
Website
taxmancpa.com
@taxman , I wonder if the post can be swamped out, and if Trent can sell you a 1"? Might still be cheaper in the long run.

Also, you could mount the carving on to a workbench, or make your own bed mount.

Mark I missed your link to the prior thread. Love your adapter to the bed. Great work!
 
Joined
Jun 6, 2018
Messages
1,948
Likes
996
Location
La Grange, IL
Thanks.
BTW, if I were making another one, I wouldn't bother with drilling out a dowel. I would "replace" the dowel with a stack of small plywood pieces glued together and drill through that.
 
Joined
Jun 6, 2018
Messages
1,948
Likes
996
Location
La Grange, IL
Checking back I see the previous link takes you to a post in the middle of the thread. Maybe this link will work better (unfortunately I can no longer edit the previous link):


Sorry for the confussion.
 
Back
Top