• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Dust Bee Gone Mask for Covid

Joined
Nov 4, 2011
Messages
496
Likes
744
Location
Bay Settlement, WI
The Dust Bee Gone masks are cloth masks with no exhalation valve. They are not NIOSH or OSHA approved, but neither are the homemade masks so many people are wearing, and they are most likely much better than the bandanas you see all the time. I don't see any reason why they wouldn't be acceptable.
 
Joined
Jan 22, 2009
Messages
441
Likes
678
Location
Crossville, TN
I have a Dust Bee Gone Mask I bought many years ago. Frankly, it sits in my shop gathering dust. After a few uses I decided it didn’t do a good enough job on the dust that could really harm my lungs, just on the nuisance dust.

It’s weave is pretty open so I’m not sure it would perform as well as cloth masks or surgical masks. For price you can’t beat a cloth mask (if your wife makes them like mine :). I’ve heard surgical throw-aways are more comfortable for longer times.
 
Joined
Aug 14, 2009
Messages
2,030
Likes
1,120
Location
Peoria, Illinois
Hard to pin down the virus particle size, but saw one definition saying a naked virus particle is from .06 -.14 micron. Particle size created by breathing and talking can be 1 micron because it is bound to water and mucus. That should slide right through a 3 micron.
 
Last edited:
Joined
Dec 23, 2014
Messages
178
Likes
289
Location
Sebastopol, California
The desired function of the mask is to significantly reduce droplet transmission from the wearer. You are not hoping for a 1 micron-tight seal. You are looking to reduce gross contamination (excuse the phrasing). In addition, even a partial reduction in inhaled virus can reduce overall viral load if one were exposed. At its most basic level, something is better than nothing. It's not a question of N95 level filtration, NIOSH, or any other certified standard. Air will unavoidably leak around the edges. That doesn't change the overall value. Yes, a properly fitted N95 mask will filter more effectively, but them's hard to come by, and not necessary, if one of the lower level masks is combined with social distancing. Meanwhile, the people who really could benefit from N95 (think frontline healthcare providers with daily exposure to the virus) would be eternally grateful if their supplies were more robust. Let the general public do what's both effective and efficient in terms of resources by distancing with generic masks, and leave the N95s to the people whose lives depend on them.

I would think the Dust Bee Gones would be happily employed under the current conditions, since they aren't really that effective for the dangerous ultra fine dust particles in a shop.

I'm a former RN married to a family practice doc.
 
Joined
Sep 8, 2013
Messages
55
Likes
22
Location
Richards Bay, South Africa
Most of the time in the workshop we are wearing the dust-be-gone with a face shield so it should be sufficient in the workshop. and being used to it makes wearing a mask easy. here in South Africa wearing a mask is compulsory outside your house. (and having a daughter who is an Emergency Physician makes it double compulsory for my wife and I)
 
Joined
Aug 14, 2007
Messages
5,436
Likes
2,792
Location
Eugene, OR
I didn't use mine much in the shop because I could smell the wood I was working on, which I heard once upon a time, meant that it was not getting the fine particles out. With this virus thing, I do use it. I can run it through the washing machine. I like the 2 strap system, in particular The velcro bottom strap. When walking around the local Farmer's Market, I can loosen it up and eat cookies or berries, but still having it cover my mouth if I sneeze. It does have a good bend thing to fit around the nose, but nothing seals around my beard, unless I use a positive pressure mask.

Some one needs to invent a mask that you can actually talk through... I never realized how important my lip reading skills were in helping me understand people, and I don't have lip reading skills.... Maybe I should get hearing aids...

robo hippy
 

odie

TOTW Team
Joined
Dec 22, 2006
Messages
7,076
Likes
9,487
Location
Panning for Montana gold, with Betsy, the mule!
Some one needs to invent a mask that you can actually talk through... I never realized how important my lip reading skills were in helping me understand people, and I don't have lip reading skills.... Maybe I should get hearing aids...


I was in the hearing clinic recently, to have hearing aids fitted, and the specialist was wearing one of these masks with a clear window:
iu


-----odie-----
 

Tom Gall

TOTW Team
Joined
Feb 20, 2013
Messages
956
Likes
1,765
Location
Hillsborough, NJ
I
Some one needs to invent a mask that you can actually talk through... I never realized how important my lip reading skills were in helping me understand people, and I don't have lip reading skills.... Maybe I should get hearing aids...

robo hippy

I guess I'm not the only one! :(
 
Joined
May 8, 2019
Messages
319
Likes
142
Location
Funen, Denmark
Actually, you may indeed have lip reading skills all right, you just aren't aware of how much you use/need them.
I first realized how much my "hearing" was depending on my eys when I noticed that I lost half a sentence every time someone would scratch his nose or adjust his glasses.
Good thing about it is that the hearing aids may give you 90% back of what you lost. Did you know that birds sing? :)
 
Joined
Aug 14, 2007
Messages
5,436
Likes
2,792
Location
Eugene, OR
Yea, it is difficult to understand you when some one is talking to the floor or wall or ceiling, rather than directly to you. Must be lip reading, again...

robo hippy
 
Joined
Feb 6, 2010
Messages
2,960
Likes
1,907
Location
Brandon, MS
Yea, it is difficult to understand you when some one is talking to the floor or wall or ceiling, rather than directly to you. Must be lip reading, again...

robo hippy

It is called projection. That is the reason speakers talk to the people and not to the screen behind them.
 
Joined
Aug 14, 2007
Messages
5,436
Likes
2,792
Location
Eugene, OR
Well, projection, and enunciation...... Some times people talking sound like the worst case drive up window speakers....

robo hippy
 
Back
Top