• We just finished moving the forums to a new hosting server. It looks like everything is functioning correctly but if you find a problem please report it in the Forum Technical Support Forum (click here) or email us at forum_moderator AT aawforum.org. Thanks!
  • Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Dave Roberts for "2 Hats" being selected as Turning of the Week for April 22, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

vfd

  1. John Hebdon

    ***VFD FIX*** - JET JWL-1642EVS OWNERS READ THIS

    I know this is a long post but I wanted to be thorough… So, like many others who have the JET JWL-1642EVS; my original VFD finally spun its final spin. I went all over the place trying to find a direct replacement only to find they are obsolete. Sure, there are companies (Ali-Express) that say...
  2. Stuart Kossover

    Stuart Kossover

    My name is Stu. I'm finally back to turning after a 10yr hiatus, only to find that the variable frequency drive (VFD) on my VB36 had died. I've spent the last few weeks installing and programming a Mitsubishi D700s VFD and I'm now up and running. I'm most interested in hollow forms and...
  3. Peter D'Attomo

    Powermatic 3520b wont run

    Went to start it up yestreday and it wont run. I unplugged & replugged, no change. I reset the VFD, & disingaged the on off button( mushroom), unplugged it, heard 2 clicks from the VFD. Replugged it, initiated the on off & speed control, and the lathe ran. I then lowerd the speed control &...
  4. Vincent Luciani

    WTB: VFD 911703 variable frequency drive

    Looking for a vfd for a Delta 46-755x Thanks
  5. J

    Powermatic 3520B VFD Replacement

    About a week ago I had the VFD on my 3520B go out with a puff of smoke. I found two of the capacitors inside had blown. So I purchased and soldered on replacements but the failure also took out the controller board. In researching a replacement as I was not about to spend $600 on a 20 year old...
  6. E

    Need help w Powermatic Model 90 lathe

    Hi- New to forum. Just acquired this and the VS sleeve which moves the VS sheave seems to be stuck. Also researching how I am going to power this things. Head is swimming w those that have bypassed the reeves w a VFD, what is best way to take my single phase 220 V incoming to 3 phase to...
Back
Top