• We just finished moving the forums to a new hosting server. It looks like everything is functioning correctly but if you find a problem please report it in the Forum Technical Support Forum (click here) or email us at forum_moderator AT aawforum.org. Thanks!
  • Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Dave Roberts for "2 Hats" being selected as Turning of the Week for April 22, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

HOLLOWING ARM BRACES

Status
Not open for further replies.
Rick Anderson

Rick Anderson

Joined
Jul 7, 2007
Messages
34
Likes
10
Hollowing Arm Brace.jpg Sorby Arm Brace.jpg 2 HOLLOWING ARM BRACES. 1 is the Robert Sorby RS2000. I'm not sure what make/model of the other one....possibly Dennis Stewart. Good condition. $50 each or both for $90 plus actual shipping cost.
Rick Anderson
rick98227@yahoo.com

Braces are SOLD!
 
Last edited:
Rick Anderson

Rick Anderson

Joined
Jul 7, 2007
Messages
34
Likes
10
The Sorby has a 3/4" bore and is the one with the knob for tightening. The other brace is also 3/4" bore and uses an Allen screw for tightening.
 
Status
Not open for further replies.
Back
Top