1. Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Oneway 2436 Lathe with full accessories and turning squares

Discussion in 'Marketplace Archives' started by Charles Pankey, Jun 3, 2019.

Thread Status:
Not open for further replies.
  1. Charles Pankey

    Charles Pankey

    Joined:
    Jun 2, 2019
    Messages:
    9
    Location (City & State):
    Flippin, Arkansas
    Lathe and everything other than cocobolo have been sold-thanks to all.
    chp

    COCOBOLO slab     11” x5 ½” x 86” $1700 -I never got the nerve to cut it-also couple cocobolo and iron wood stumps 18”x9”-$200 each

    Age and cancer have taken their toll on me and I have to scale down to a different living arrangement. You must pick up or make shipping arrangements. Located in North Central Arkansas, approximately 15 miles North of Flippin.
    If interested, please email to okchp@aol.com
     
    Last edited: Aug 6, 2019
    Charles Pankey, Jun 3, 2019
    #1
  2. Glenn Lefley

    Glenn Lefley

    Joined:
    Jul 10, 2017
    Messages:
    595
    Location (City & State):
    Invermere, British Columbia
    Can you send photo of cocobolo please
     
    Glenn Lefley, Jun 3, 2019
    #2
  3. Karl Loeblein

    Karl Loeblein

    Joined:
    Feb 12, 2018
    Messages:
    154
    Location (City & State):
    Millington, TN
    Charles, I'd like to get more info on the Oneway EZ core system. Also, what about the sanding mandrels and various gauges (i.e bowl thickness gauge) in your second pic?

    Thanks,
    Karl
     
    Karl Loeblein, Jun 4, 2019
    #3
  4. Charles Pankey

    Charles Pankey

    Joined:
    Jun 2, 2019
    Messages:
    9
    Location (City & State):
    Flippin, Arkansas
    Glenn-is the slab what you are wanting a pic?
     
    Charles Pankey, Jun 4, 2019
    #4
  5. Charles Pankey

    Charles Pankey

    Joined:
    Jun 2, 2019
    Messages:
    9
    Location (City & State):
    Flippin, Arkansas
    Oneway 24" easy core base set with knife/blade 3176-1
    Karl-I didn't list everything, but it is all for sale
     
    Charles Pankey, Jun 4, 2019
    #5
  6. Karl Loeblein

    Karl Loeblein

    Joined:
    Feb 12, 2018
    Messages:
    154
    Location (City & State):
    Millington, TN
    Don't see knife blade 3176-1 listed on Oneway's site. Is this an older design that's been updated by chance?
     
    Karl Loeblein, Jun 4, 2019
    #6
  7. Charles Pankey

    Charles Pankey

    Joined:
    Jun 2, 2019
    Messages:
    9
    Location (City & State):
    Flippin, Arkansas
    It was purchased years ago. I used it once on a 11x6 piece of walnut. The cut was 9.25 outside and 8.5 inside. 24” base unit
     
    Charles Pankey, Jun 4, 2019
    #7
  8. Bill Boehme

    Bill Boehme Administrator Staff Member

    Joined:
    Jan 27, 2005
    Messages:
    11,440
    Location (City & State):
    Dalworthington Gardens, TX
    Home Page:
    I sent an email yesterday about the Easy Core, but I have changed my mind. It's a great deal, but I already have too many things that I don't use.
     
    Bill Boehme, Jun 4, 2019
    #8
    Emiliano Achaval likes this.
  9. Charles Pankey

    Charles Pankey

    Joined:
    Jun 2, 2019
    Messages:
    9
    Location (City & State):
    Flippin, Arkansas
    No problem Bill-I couldn't live without it 15 yrs ago and used it once. It did work quite well.
     
    Charles Pankey, Jun 5, 2019
    #9
  10. Tim Tucker

    Tim Tucker

    Joined:
    Nov 4, 2018
    Messages:
    197
    Location (City & State):
    Penrose, NC
    I am interested in the Spin Doctor deep hollowing tool....DO you have some specifics on this?
    Thanks
    T
     
    Tim Tucker, Jun 5, 2019
    #10
  11. Charles Pankey

    Charles Pankey

    Joined:
    Jun 2, 2019
    Messages:
    9
    Location (City & State):
    Flippin, Arkansas
    Charles Pankey, Jun 5, 2019
    #11
  12. Charles Pankey

    Charles Pankey

    Joined:
    Jun 2, 2019
    Messages:
    9
    Location (City & State):
    Flippin, Arkansas
    s1.JPG s2.JPG s3.JPG s4.JPG
    Pics of slab
     
    Charles Pankey, Jun 5, 2019
    #12
  13. Brad Winesett

    Brad Winesett

    Joined:
    May 9, 2019
    Messages:
    56
    Location (City & State):
    Fairlawn, Virginia
    Charles - I sent you a conversation with some questions.
     
    Brad Winesett, Jun 18, 2019
    #13
    Bill Boehme likes this.
  14. Charles Pankey

    Charles Pankey

    Joined:
    Jun 2, 2019
    Messages:
    9
    Location (City & State):
    Flippin, Arkansas
    Brad-I can’t find your conversation, please email okchp@aol.com
     
    Charles Pankey, Jun 18, 2019
    #14
  15. Emiliano Achaval

    Emiliano Achaval Administrator Staff Member

    Joined:
    Dec 14, 2015
    Messages:
    2,328
    Location (City & State):
    Maui, Hawaii
    Home Page:
    Emiliano Achaval, Jul 20, 2019
    #15
  16. Charles Pankey

    Charles Pankey

    Joined:
    Jun 2, 2019
    Messages:
    9
    Location (City & State):
    Flippin, Arkansas
    Only thing left is the lathe and turning blanks.
     
    Charles Pankey, Jul 21, 2019
    #16
    Emiliano Achaval likes this.
  17. Emiliano Achaval

    Emiliano Achaval Administrator Staff Member

    Joined:
    Dec 14, 2015
    Messages:
    2,328
    Location (City & State):
    Maui, Hawaii
    Home Page:
    Thanks for your reply, let us know if you sell it. Aloha
     
    Emiliano Achaval, Jul 23, 2019
    #17
  18. Emiliano Achaval

    Emiliano Achaval Administrator Staff Member

    Joined:
    Dec 14, 2015
    Messages:
    2,328
    Location (City & State):
    Maui, Hawaii
    Home Page:
    Can you please post the cocobolo slab in a new thread, might help you sell it better, then we can close this one. Thanks.
     
    Emiliano Achaval, Aug 20, 2019
    #18
  19. Emiliano Achaval

    Emiliano Achaval Administrator Staff Member

    Joined:
    Dec 14, 2015
    Messages:
    2,328
    Location (City & State):
    Maui, Hawaii
    Home Page:
    Can you please let us know you are still trying to sell the lathe and the blanks. Thank you
     
    Emiliano Achaval, Oct 10, 2019
    #19
Thread Status:
Not open for further replies.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice