1. Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Record power lathe

Discussion in 'Getting Started' started by Maxime Hurtubise, Dec 19, 2020.

  1. Maxime Hurtubise

    Maxime Hurtubise

    Joined:
    Dec 19, 2020
    Messages:
    5
    Location (City & State):
    Montréal, QC
    Last edited: Dec 19, 2020
  2. Dan Lambert

    Dan Lambert

    Joined:
    Nov 23, 2020
    Messages:
    7
    Location (City & State):
    Jasper, GA
    Record Power is an English company that has been making power equipment for a while. They are sold here in the US by several of the more prominent woodworking suppliers, including Highland Woodworking and Woodcraft.

    From my quick look, it appears that their tools have a 5 year warranty. Here is the page Highland Woodworking has on their website for this lathe. https://www.highlandwoodworking.com/record-power-envoy-16in-15hp-vs-lathe.aspx
     
    Maxime Hurtubise likes this.
  3. Maxime Hurtubise

    Maxime Hurtubise

    Joined:
    Dec 19, 2020
    Messages:
    5
    Location (City & State):
    Montréal, QC
    Yep, look like it's really new, it's on Pre-order in most Us store.
     
  4. Russell Nugent

    Russell Nugent

    Joined:
    Apr 1, 2019
    Messages:
    207
    Location (City & State):
    Bashaw, Alberta
    With boxing day coming up soon you might find a good deal on a revo 1836. Also doesnt hurt to call around. KMS tools started selling laguna stuff and their advertised/online prices aren't always the actual prices as Laguna has minimum allowed posted prices apparently.
     
    Maxime Hurtubise likes this.
  5. robo hippy

    robo hippy

    Joined:
    Aug 14, 2007
    Messages:
    3,146
    Location (City & State):
    Eugene, OR
    Not familiar with them, as in never turned on one. For me, I would want 220 volt for that size of motor. I do prefer the 3 speed range to the more standard 2 speed range.

    robo hippy
     
    Maxime Hurtubise likes this.
  6. Mark Jundanian

    Mark Jundanian

    Joined:
    Jun 6, 2018
    Messages:
    845
    Location (City & State):
    La Grange, IL
    I haven't seen any of the Coronet lathes in person, and certainly haven't used one. But I did peruse their features on line and thought them worthy of consideration. Is there any where you can see one in person?
     
    Maxime Hurtubise likes this.
  7. Robert D Evans

    Robert D Evans

    Joined:
    Jan 31, 2020
    Messages:
    161
    Location (City & State):
    Hoschton, GA
    Michael Gibson won a Record Power 14x20 lathe for our club in a woodturning contest sponsored by Record Power. I've turned on it several times during our workshops prior to the Corona Virus shutdown. It's a nice lathe. The controls are a little odd until you get used to them. Mike Peace did an extensive review of this lathe on Youtube.


    View: https://www.youtube.com/watch?v=bEWqhqM1EYw


    Hope this helps.
     
    Maxime Hurtubise likes this.
  8. Maxime Hurtubise

    Maxime Hurtubise

    Joined:
    Dec 19, 2020
    Messages:
    5
    Location (City & State):
    Montréal, QC
    I think will buy it, the 16x24, it fit my budget. Not a 2 hp but 1.5hp will be enough for my use. Looks better than Nova, shop fox or King. Everything is to expensive with Laguna; extension, lamp, etc, around here, the 18/36 is almost 4000$ Canadian.. Oneway in same size is 4200$ can, in that price range, i guess Oneway is the way to go.

    Power Record Envoy is about 2700$, same design as jet,looks like it.
     
  9. Everett Vander Horst

    Everett Vander Horst

    Joined:
    Jan 29, 2021
    Messages:
    5
    Location (City & State):
    Hamilton, ON
    I am thinking of upgrading. I currently have a Nova 1624 (the earlier model) and would like to get something with a sliding headstock and variable speed. I've been considering the Envoy (the Canadian dealer, Stockroom Supply, is less than an hour from me, in the Niagara peninsula). Did you order through them, or from the States?

    The only thing I don't like about the Envoy is the speed range. 250 rpm is too fast for letting a finish dry drip-free. So I'm looking at the Laguna 1836, but it's seriously irritating to have to pay nearly $1,000 extra just to get the lower speed. And have to sacrifice the remote/repositionable controller.

    Did you get the Envoy? If so, what do you think?
     
    Last edited: Feb 27, 2021 at 4:10 PM
  10. Mark Jundanian

    Mark Jundanian

    Joined:
    Jun 6, 2018
    Messages:
    845
    Location (City & State):
    La Grange, IL
    @Everett Vander Horst , since you want a slower low end speed have you considered the Nova Galaxy? The low end is 100 rpm and the headstock both slides and rotates. It is 120V.
     
  11. Everett Vander Horst

    Everett Vander Horst

    Joined:
    Jan 29, 2021
    Messages:
    5
    Location (City & State):
    Hamilton, ON
    Yeah, looked at the Galaxy. Another requirement I have is that the lathe needs to be about 60" wide. The Galaxy won't fit the space.
     
    Mark Jundanian likes this.
  12. Doug Freeman

    Doug Freeman

    Joined:
    Feb 26, 2019
    Messages:
    423
    Location (City & State):
    Lebanon, Missouri
    The Nova Saturn is <44” with the same headstock as the Galaxi, and the outboard toolrest support only adds ~4”.
     
  13. Jerry Bochenek

    Jerry Bochenek

    Joined:
    Sep 30, 2018
    Messages:
    36
    Location (City & State):
    The Villages, Florida
    The Jet 1640evs has a low end speed of 40 rpm and has a sliding headstock. The overall length i 54"
     
  14. Everett Vander Horst

    Everett Vander Horst

    Joined:
    Jan 29, 2021
    Messages:
    5
    Location (City & State):
    Hamilton, ON
    Unfortunately the Saturn doesn't have the Galaxi's sliding headstock.
     
  15. Everett Vander Horst

    Everett Vander Horst

    Joined:
    Jan 29, 2021
    Messages:
    5
    Location (City & State):
    Hamilton, ON
    The Jet could be a good pick but cannot be purchased in Canada.

    I'm leaning towards purchasing the Record Envoy, and dealing with the slow-speed problem by building some kind of motorized slow-speed finishing jig that's robust enough to hold a full-size chuck with a large bowl still attached. See this thread:

    https://aawforum.org/community/inde...peed-finishing-machine-jig.17269/#post-175111

    It's surprising that in a world with so many serious hobbyist lathes out there, I can't seem to find the one that has all of the features I'm looking for, at least not within a CDN$4000 price range. Maybe I'm just too particular.
     
  16. Russell Nugent

    Russell Nugent

    Joined:
    Apr 1, 2019
    Messages:
    207
    Location (City & State):
    Bashaw, Alberta
    Laguna 1836 would be more comparable to the regent, not the envoy. Your extra almost 1000 is 2 inches more swing, 12 inches more length and the slow speed you actually want. It's actually only 200 more than the regent, which would be the comparable machine.
     
  17. Doug Freeman

    Doug Freeman

    Joined:
    Feb 26, 2019
    Messages:
    423
    Location (City & State):
    Lebanon, Missouri
    While the Saturn HS does not slide, it doesn’t need to. Unlike a hs sliding configuration, where the tailstock needs removed & hs slid down to face a bowl for hollowing, on the Saturn the headstock simply pivots to wherever one wants it, and the outboard tool rest banjo is right there, just drop in a tool rest and go - no sliding, no lifting off the tailstock.

    For sanding or applying finish, pivot the HS 90 or 180 deg, no lathe bed in the way or to get finish on. It does only go down to 100 rpm. For warped work, I mount in a chuck on the lathe and just turn by hand. Would prefer a slower speed but none of those lathes have a pivoting HS which I find invaluable.
     
    Last edited: Feb 13, 2021
    odie and Timothy White like this.
  18. Rusty Nesmith

    Rusty Nesmith

    Joined:
    Feb 16, 2021
    Messages:
    44
    Location (City & State):
    Parkersburg, West Virginia
    I just bought a Record Power Envoy from Highland Woodworking yesterday. Great people to deal with. I will have it Monday. It had all of the features I was looking for. I have watched a ton of videos on YouTube and everybody that turns on a RP lathe likes it.
     
  19. Maxime Hurtubise

    Maxime Hurtubise

    Joined:
    Dec 19, 2020
    Messages:
    5
    Location (City & State):
    Montréal, QC
    After a month of using it, it's very fun, great machine. Well, I'm woodturner novice with my first lathe soo i can't really tell. But so far everything seen to be well made, a bit of bouncing with a 8-10 inch dry log spinning at 400-500 rpm.
     
  20. Rusty Nesmith

    Rusty Nesmith

    Joined:
    Feb 16, 2021
    Messages:
    44
    Location (City & State):
    Parkersburg, West Virginia
    Which model did you buy?
     
  21. Maxime Hurtubise

    Maxime Hurtubise

    Joined:
    Dec 19, 2020
    Messages:
    5
    Location (City & State):
    Montréal, QC
    Coronet Envoy with Oneway Talon chuck, made my own lifting wheels with bench caster bolted to 1/8 steel plate. @Rusty Nesmith
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice