• Congratulations to Phil Hamel winner of the April 2025 Turning Challenge (click here for details)
  • Congratulations to Steve Bonny for "A Book Holds What Time Lets Go" being selected as Turning of the Week for 28 April, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Prev
2239 Claro Walnut Burl
Next
Prev
Applewood burl hollow form #2
Horse Chestnut Burr and Blackwood box
2239 Claro Walnut Burl.
2239 Claro Walnut Burl
Gold Carved Bowl
Silver Maple Bowl
Camphor Bowl
Next
Odie

2239 Claro Walnut Burl

  • Media owner Odie
  • Date added
view of foot/bottom
Click to expand...
  • Like
Reactions: Dimitris Psilopatis, Kevin Weir, Tom Gall and 11 others
P
I have a question. How do you sand and clean out the decorative grooves - which on yours look very crisp and clean? I also make use of these, but they often seem to collect dust and debris when sanding and finishing. If I use a tool like the point awl an awl to clean them out, the sometimes get a bit rough. Do you just crease sandpaper and fit it down into the grooves on the lathe? Use a purpose-made scraper? The point of a skew? Finger nail? Just curious.
 
Odie
Phil Light said:
I have a question. How do you sand and clean out the decorative grooves - which on yours look very crisp and clean? I also make use of these, but they often seem to collect dust and debris when sanding and finishing. If I use a tool like the point awl an awl to clean them out, the sometimes get a bit rough. Do you just crease sandpaper and fit it down into the grooves on the lathe? Use a purpose-made scraper? The point of a skew? Finger nail? Just curious.
Click to expand...

Howdy Phil......

During sanding operations, a strong blast of air is all I need to remove the dust that collects within the grooves. I have had troubles with buffing compounds that get trapped within the grooves while doing the Beall 3-step buffing process. There, I've found that keeping the buffing wheels parallel, and not perpendicular to the grooves, minimizes any compound that tends to collect within the grooves. Sometimes a stiff toothbrush is what will clean out the grooves of this buffing compound.....but, using the compounds sparingly on the wheels themselves is the most important thing to consider....

-o-
 
P
odie said:
Howdy Phil......

During sanding operations, a strong blast of air is all I need to remove the dust that collects within the grooves. I have had troubles with buffing compounds that get trapped within the grooves while doing the Beall 3-step buffing process. There, I've found that keeping the buffing wheels parallel, and not perpendicular to the grooves, minimizes any compound that tends to collect within the grooves. Sometimes a stiff toothbrush is what will clean out the grooves of this buffing compound.....but, using the compounds sparingly on the wheels themselves is the most important thing to consider....

-o-
Click to expand...
Thanks, Odie. It's the abrasive pastes that gum up the grooves for me - either Yorkshire Grit or Dr. Kirk's Scratch Free. But what really triggered my question is that I realized the grooves in my latest bowl weren't cut as cleanly as I'd like (a little rough and fuzzy on closer inspection) - but I'd already removed the foot tenon and finished the foot. I've considered trying a checkering file/cutter to clean up the groves if they get gummed up or rough.
 

Media information

Category
Member Galleries
Added by
Odie
Date added
View count
582
Comment count
5
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
2239 RESIZED claro walnut burl (17).jpg
File size
183.6 KB
Date taken
Sat, 23 December 2023 12:32 PM
Dimensions
1500px x 1375px

Share this media

Back
Top