• Congratulations to Phil Hamel winner of the April 2025 Turning Challenge (click here for details)
  • Congratulations to Steve Bonny for "A Book Holds What Time Lets Go" being selected as Turning of the Week for 28 April, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Dave Roberts

Arbutus Pepper Mill

Turned and drilled out on our Oneway lathe and then turned between centers on a hybrid Rose Engine lathe. The headstock and tailstock can be tied together and then both move back and forth on linear slides. This allows pieces up to about 24" to be turned between center on a Rose Engine. The mill is about 3" diameter by 11" tall and fitted with a CG mechanism. Turned from Arbutus and finished with 7 coats satin Lacquer spray.
There are no comments to display.

Media information

Category
Member Galleries
Added by
Dave Roberts
Date added
View count
363
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
Apple iPhone 12 Pro
Aperture
ƒ/1.6
Focal length
4.2 mm
Exposure time
1/155 second(s)
ISO
32
Flash
Off, did not fire
Filename
IMG_6368 a.JPG
File size
403.5 KB
Date taken
Thu, 25 July 2024 8:21 AM
Dimensions
1439px x 2006px

Share this media

Back
Top