• May 2025 Turning Challenge: Long Neck Hollowform! (click here for details)
  • Congratulations to Phil Hamel winner of the April 2025 Turning Challenge (click here for details)
  • Congratulations to Dion Wisniewski for "Basketweave" being selected as Turning of the Week for 12 May, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
G

oak_burl_with_brass_ring

  • Media owner gary rock
  • Date added
This is a Oak burl(4 inches tall and 4 inches wide) that I put a brass ring around after hollowing out. Cut a small grove for the ring to sit in. Finished the piece with Danish Oil and wet sanded with the oil to 2000 grit, for that solf sliky feel. It took several tries to get the right fit on the ring ( split apart ) when it was right pulled the ring together and glued back together.

Media information

Category
Member Galleries
Added by
gary rock
Date added
View count
2,203
Comment count
2
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON CORPORATION NIKON D300
Aperture
ƒ/20
Focal length
130.0 mm
Exposure time
2.5 second(s)
ISO
640
Filename
oak_burl_with_brass_ring.jpg
File size
100.5 KB
Date taken
Sat, 19 June 2010 9:38 AM
Dimensions
800px x 531px

Share this media

Back
Top