ash

Basket Weave Bowl from ash. Bottom carved, top laser engraved. Dyed with alcohol and water-based dyes. Finished with clear gloss enamel. 14 1/4" diameter, 4 1/2" tall.

Ash was dyed Transtint Bright Red, scorched, wire wheeled and re-dyed, two shared of gold gilding wax. Pear Off-Axis Tree cut on three axis with different skews, dyed green then some black dye. Silver and Green gilding wax dabbled on tree and ground to simulate snow. All topped with an acrylic...

Burnt with a torch, wire bushed, ebonized, embellishing wax, rattle can glaze. Turned from an ash crotch found in a firewood pile. There were lots of cracks and repairs needed after drying making this particular piece of wood a candidate for the rough treatment above. Bottom view

Burnt with a torch, wire bushed, ebonized, embellishing wax, rattle can glaze. Turned from an ash crotch found in a firewood pile. There were lots of cracks and repairs needed after drying making this particular piece of wood a candidate for the rough treatment above. Top view

I've been watching Glenn Lucas on Instagram where he's been working with rippled ash. After searching online, I assumed this wood pattern only occurs overseas. Lo and behold I picked up a roadside ash log last week and roughed out then cored another bowl. To my surprise I found a rippled ash...

Anyone know how to permanently delete my old posts?

Ash Vessel 5X7 With Poly Finish

This is my next attempt at a hollow form, my largest so far, using this piece of end grain black ash. My intention was to feature the small growth rings around the wide sapwood display. This tree displays 107 years in growth rings, less than .10 per year. Overall 8"x6". The opening is...

Here is the latest piece in my Open Spiral series. This is a commissioned work and the buyer has been calling frequently, so I named the piece Desire. The body of the piece was created during the filming of my instructional DVD showcasing my Cable Driven Router System. Size is 19 tall x 13...

My wife absolutely fell in love with this piece. When I told her I named it Antigua, she informed me I had better not sell this one. I am pleased with the coloration; it brings back fond memories of the Caribbean waters of Antigua where we honeymooned. The hollow form vase is turned from end...

This hollow form is turned from end grain, fiddle back ash. It measures 7 tall by 4.5 wide. It is finished with aniline dyes, spray lacquer, and Briwax tinted black with MIXOL.

This is an ash hollow form which has been beaded, sandblasted, dyed, waxed and lacquered. It's about 9 inches tall.

This is the inside view of the abalone bead inset. This ash lidded bowl is 5 1/2" w x 3" h with 2" walnut finial

Ash Lidded Bowl with Walnut Finial and Abalone Bead Decoration inside lid. 5 1/2" w x 3" h with 2" finial. This bowl was a real design change. The original piece had a couple of wormholes show up at the last minute and I had to cut the whole middle section out so made it lidded...

Turned then carved green ash vessel 21x24x20" tall.

From the Mountain Ash Series , A Hollow form turned green from mountain ash with a texturized and ebonized collar that has warped since completion.

This is one of 3 hollow pieces turned within 24 hrs of taking a mountain ash down in my front yard that was almost dead. Piece is 4 in. wide and slightly less high and exhibits spalting. Finish is 3 coats of tung oil .

Threesome Wood: Ash Finish: Danish oil Length: One Piece, 235mm (9-3/8") Width: 90mm (3-3/8") This piece was a bit of a challenge as the spheres had to be as close to perfect as possible otherwise it was doomed to fail. I'm pretty happy with the finished piece. I would like...

Alternate view of end-grain box with snap-fit lid. Made from Black Walnut with Black Ash Burl accents. 4.5" high X 3.5" diameter.