• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Peter Jacobson for "Red Winged Burl Bowl" being selected as Turning of the Week for April 29, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

painting

  1. 4

    How to dry bark for carving?

    I've been turning some half rounds of Cedar that were cut 2 years ago - amazingly there are very few splits in the 16" high by 17" wide blocks. While doing this, I discovered I could peel the bark off intact from the wood, and got to wondering if I can dry the sheets and do some carving or...
  2. G

    Help with painting hard maple on a lathe

    The title says it. Want to color hard Maple white such that it will wear well also. Any help is appreciated. Thanks in advance. Gil Blais 401-484-0328 if a discussion is needed.
  3. Valentines coming

    Valentines coming

    Actually this one is for our anniversary that was yesterday. Maple 6 diameter 1 and 1/4 bowl height and ebony finial 4 inches heigh. With 8 pierced hearts. painted with irridecent acrylics. As always comments welcome . Jeff Greenwood
  4. Shade

    Shade

    This pierced, painted, pyrographed piece is 6" high and 14 diameter elm. I received it from a turning friend who had gone through the bottom of it He knows I pierce so here it is so far and after 47 hours for the piercing alone. The colours are a mix of 3 each and with irridescent and...
Back
Top