• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

5/8" P&N Bowl Gouge

Status
Not open for further replies.

Angelo

President Emeritus
Joined
Jun 14, 2004
Messages
399
Likes
110
Location
Lancaster, Pennsylvania
Website
www.majicbrand.com
No longer being offered on the open market. (I cannot see why as it's very nice bowl gouge.) The blade is approx. 10.5" long including the tang. The tang is approximately 2" long with a diameter of 1/2" So it can fit into either size handle. The adapter is from Jimmy Clewes and is 5/8" diameter. I was using this gouge in the Jimmy Clewes golden 5/8" diameter collet chuck. Price includes the adapter but not the collet. What you see is what you get.
It has a swept back grind. It is not ground as a 40/40 grind. It is an old style "Irish" grind as is my preference.
 

Attachments

  • Gouge w Adapter.jpg
    Gouge w Adapter.jpg
    55.8 KB · Views: 64
  • Gouge and adapter.jpg
    Gouge and adapter.jpg
    58.7 KB · Views: 63
  • Bowl Gouge Grind.jpg
    Bowl Gouge Grind.jpg
    49.4 KB · Views: 65
Status
Not open for further replies.
Back
Top