• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

AAW magazine article!

Joined
Jan 24, 2010
Messages
3,058
Likes
900
Location
Cleveland, Tennessee
The latest issue has an article by John Lucas. It is both an interesting and informative article on indexing on the lathe. Had to run out to the shop and look. My SuperNova2 chuck has holes in the back which I take to be for indexing. John, thanks!
 

john lucas

AAW Forum Expert
Joined
Apr 26, 2004
Messages
8,321
Likes
3,576
Location
Cookeville, TN
Thanks John. I still don't have my issue yet. Of course I previewed the article a month or so ago.
 
Back
Top