• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details)
  • Congratulations to Matt Carvalho for "Red Mallee Folded Form" being selected as Turning of the Week for February 9, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

AAW Video

Joined
Feb 6, 2010
Messages
3,492
Likes
2,582
Location
Brandon, MS
Website
threeringswoodshop.square.site
At the symposium the AAW introduced a video site where the posted videos are reviewed prior to posting by AAW. Kind of like a safety and interest review. The site address was displayed at the awards ceremony and I did not write down depending on memory. Guess you know what happened to that.

Does anyone know what that url was?
 
At the symposium the AAW introduced a video site where the posted videos are reviewed prior to posting by AAW. Kind of like a safety and interest review. The site address was displayed at the awards ceremony and I did not write down depending on memory. Guess you know what happened to that.

Does anyone know what that url was?
Dave Mueller and Kathleen Duncan have been working on this project. I am not sure if it's been officially released. E-mail either one of them for further information.

It was nice to meet you at the AAW symposium over the weekend, Gerald.
 
Thanks Andy. I will try that. The url was given out at the Awards Ceremony and Kathleen said in the chapters meeting that this has been up for a little over a year . She actually went on lone to the site and selected and started a video. I will post back when I get the address.

Was good to talk to you also Andy.
 
Ok folks I found it. It is on the home page flash screen.

aawvideosource.org

You will find this site interesting . Only 110 videos now. Use the Submit A Video button to submit videos for addition and then will be evaluated and if meeting critera will be added. The site can be searched by topic to find videos.
 
Emiliano,

That's a very good point about your club's ability to receive and display a remote presentation also means that you have the ability to receive and display pretty much *any* content via the Internet.

Next step, replace that hi-tech sheet you used for the display with a real projection screen. < vbg >
 
Emiliano,

That's a very good point about your club's ability to receive and display a remote presentation also means that you have the ability to receive and display pretty much *any* content via the Internet.

Next step, replace that hi-tech sheet you used for the display with a real projection screen. < vbg >

We use wall mounted LCDs. A 65" on one wall and a 60" on the other. Projectors that bright are cost prohibitive by comparison. But eventually it will move to 4K
 
Hi Gerald:

Looks like Al Hockenbery provided you with the URL for the AAW Video Source at http://aawvideosource.org/. You are also able to access it through the AAW website at http://www.woodturner.org. As mentioned at the symposium, the videos have been pre-screened by the AAW for quality content, production, and safety.

We'll be adding more videos regularly and depend on our members for content. If you would like to recommend a video, please send it (or send a link) to info@aawvideosource.org. The video will be reviewed for quality and safety, and if approved, it will be included in the video website.

Anyone can use AAW Video Source, members and non-members alike - we'd appreciate your help to spread the word.

Kindest regards,
Kim
 
Back
Top