• January 2026 Turning Challenge: Turned and Bent! (click here for details)
  • Congratulations to Phil Hamel, People's Choice in the December 2025 Turning Challenge (click here for details)
  • Congratulations to Ric Taylor for "Black Ash Burl" being selected as Turning of the Week for January 26, 2026 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Attempting A Trent Bosch Vessel Of Illusion

Lew Kauffman

Lew Kauffman

Joined
Feb 28, 2018
Messages
4
Likes
6
Location
Chambersburg, PA
I have been playing with these for a little while. This one is spalted sycamore with a maple insert. It is approximately 6" in diameter and 5" tall. Turned and hollowed with carbide tools. Carved and sculptured with a rotary tools. Finished with abrasive grit and wax.
 

Attachments

  • oblique.jpg
    oblique.jpg
    597.5 KB · Views: 7
  • side.jpg
    side.jpg
    519.6 KB · Views: 7
You must log in or register to reply here.
Back
Top