• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Matt Carvalho for "Red Mallee Folded Form" being selected as Turning of the Week for February 9, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Butternut Bowl Question

Dave Fritz

Dave Fritz

Joined
Jul 24, 2008
Messages
764
Likes
222
Location
Montfort, Wisconsin
enhance

This is a butternut salad bowl that we've used since 2014. Recently we noticed a black spot on the base of the bowl. I removed most of the black with sandpaper. It looks like it was a small knot that started to take on moisture and mold or something.

enhance


The finish is a mixture of walnut oil with a little bee's wax and carnuba mixed in.

Anxious to hear what your thoughts are regarding a fix. Thanks.
 
The black spot is probably the result of mold, and moisture/oxygen at that location. I haven't run across this before, but for a "try", I'd make sure it was completely dried out, and then use thumb pressure to squeeze some epoxy into the effected area. As long as it stays dry, it's not likely to get worse.....I think. If it goes all the way to the inside, where it might be in contact with food, I'd think about making a new bowl! ;)

How do you wash the exterior? Use water on that surface?

All that is just a guess on my part.......:D

-----odie-----
 
Thanks Odie, it doesn't go through to the inside and we do wash it with soap and water, then rinse off and dry with a towel and let it dry on the table before putting it away.
 
Black spots like that are usually mold, pitch pocket in the wood, reaction to iron, or tanic acid.
I think Kelly is right with mold.
Let it dry and try to seal out the water this will keep it from growing.

You now have a patina.....

It is unlikely you will be able to remove it without damaging the surrounding area.
 
You must log in or register to reply here.
Back
Top