• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Matt Carvalho for "Red Mallee Folded Form" being selected as Turning of the Week for February 9, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Drying large dimension wood for sculpture & carving

D

Doug Rasmussen

Joined
Dec 5, 2015
Messages
1,075
Likes
565
Location
Seattle, WA
It seems wood sculpture is becoming part of the AAW per a recent cover story and gallery photos.

So my question is how are these large, thick pieces dried to prevent cracking? I know about turning wet wood to over thickness for drying, then re-turning. I've also been led to believe kiln drying only works up to a certain thickness.

Maybe certain species can be kiln dried in thicker sections? I recently gave a 6" x 6" by 4 foot piece of dry Alaskan yellow cedar to a native carver, that piece (I think) was dimension-ally beyond the kiln drying capacity of most woods.
 
I would look for large maple.....4' to 5' wide...quarter it and go from there.....if you want it dry put it off ground and in shade....probably take @ least 2 years before working....you sometimes can find that large of cherry but not much chance of large piece not cracking......suggest you drive big S in ends for support......Do not think large piece can successfully be anchorsealed......problem.....probably take 2 years to see if it would work.....easy to find oak in size if you want a challenge to carve......will be interested following thread and opinions
 
You must log in or register to reply here.
Back
Top