-
Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details) -
Congratulations to David Croxton for "Geri's Basket Illusion" being selected as Turning of the Week for February 2, 2026 (click here for details) -
AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
-
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
glue for Corian
- Thread starter grandy
- Start date
Grandy,
This is the way I glue corian, be sure you have two clean flat surfaces, clamp the two pieces of corian together, at the seam add thin ca glue, it will wick into the seam and fuse the two pieces together.
This may not be the best way to do this, but it works for my turnings of small objects.
Doug Stevens
Lake St. Louis MO.
This is the way I glue corian, be sure you have two clean flat surfaces, clamp the two pieces of corian together, at the seam add thin ca glue, it will wick into the seam and fuse the two pieces together.
This may not be the best way to do this, but it works for my turnings of small objects.
Doug Stevens
Lake St. Louis MO.
Doug, I use the same method. Not that I do much Corian work, the method works when I do.
Grandy,
I have been playing with Corian for ~15 years now. Wicking in water-thin CA glue works fine if you only want to hold two pieces of Corian together but you really need to use medium viscosity CA glue if you are going to do something mechanical with it, e.g, turning. By wicking it in thin glue will not cover the mating surfaces completely, leaving voids and a weak joint. I rub the medium glue between the mating surfaces to ensure complete coverage and quickly squeeze the pieces together on a guide covered with thin plastic sheet (so it wouldn't glue to the guide permanently) to get a perfect alignment. The attached picture of a soap dispenser put together as described has been in use continuously since 1997 and has not leaked yet. I am attaching an additional picture to show you can do intricate patterns with glued-up Corian. By the way, come to the segmenting symposium held at Arrowmont this coming November (http://www.segmentedwoodturners.org/assets/symposium.pdf) if you are really interested in turning Corian. I will be doing two rotations on turning Corian.
Good luck and have fun.
Andy
I have been playing with Corian for ~15 years now. Wicking in water-thin CA glue works fine if you only want to hold two pieces of Corian together but you really need to use medium viscosity CA glue if you are going to do something mechanical with it, e.g, turning. By wicking it in thin glue will not cover the mating surfaces completely, leaving voids and a weak joint. I rub the medium glue between the mating surfaces to ensure complete coverage and quickly squeeze the pieces together on a guide covered with thin plastic sheet (so it wouldn't glue to the guide permanently) to get a perfect alignment. The attached picture of a soap dispenser put together as described has been in use continuously since 1997 and has not leaked yet. I am attaching an additional picture to show you can do intricate patterns with glued-up Corian. By the way, come to the segmenting symposium held at Arrowmont this coming November (http://www.segmentedwoodturners.org/assets/symposium.pdf) if you are really interested in turning Corian. I will be doing two rotations on turning Corian.
Good luck and have fun.
Andy
Attachments
Nice looking HF, Andy
what about corian and wood?
Does CA glue work just as well for gluing wood to corian?
Does CA glue work just as well for gluing wood to corian?
I've had good results gluing corian segments into wood pen blanks. I use gel CA and clamp for 30 minutes or so, and have not had one let go. I realize that it's a small application, though.