• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Home built outboard bowl turning lathe $750

Status
Not open for further replies.
Joined
Jul 17, 2022
Messages
69
Likes
85
Location
Deliverence, GA
It can handle 200-300 lab blanks when anchored and ballasted. Motor is 220v 3hp, 3ph, 1800rpm inverter rated with adjustable base and matching VFD. The spindle is 1-15/16 chrome-moly, threaded 1-1/2-8tpi Bearing races are rated 6000 lbs. Table is 1/2 corten plate and weighs 600 lbs. I can no longer lift heavy blanks. Everything is basically brand new. $750 (about 1/2 of what I have in it. All grade 8 fasteners. Currently disassembled and in storage. Needs a belt guard. I can load it easily. 912-269-2423 dermoosundsquirrelgmail .combl-1.JPGbl-2.JPGbl-2.JPGspalted maple.JPGVFD Drive.JPG

Located 15 miles South of Jesup, GA Tim 912-269-2423
 
Last edited:
Status
Not open for further replies.
Back
Top