• Congratulations to Phil Hamel winner of the April 2025 Turning Challenge (click here for details)
  • Congratulations to Steve Bonny for "A Book Holds What Time Lets Go" being selected as Turning of the Week for 28 April, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Honing Wheel - thank yous!

R

roger dunn

Joined
Feb 15, 2005
Messages
18
Likes
0
Location
Shine, Washington
I'd like to thank www.davidreedsmith.com and Bill Noble www.wbnoble.com, for help in creating an MDF honing wheel for the outboard spindle on my General 260. After I saw the write up on David Reed Smith's website, I called around trying to find a faceplate with left handed threads. Very pricey! I wrote to Bill and he suggested I just punch a 1" hole in the center and thread the glued up MDF and hard maple onto the spindle. It worked. More importantly it is a quick and easy application for honing gouges and skews with jewelers' rouge.
Thanks again
 
You must log in or register to reply here.
Back
Top