• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • Congratulations to David Bartell, People's Choice in the March 2026 Turning Challenge (click here for details)
  • Congratulations to Chris Lawrence for "Dragon's Grip" being selected as Turning of the Week for March 30, 2026 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Hunter #1 on Rolly Munro

John Tisdale

John Tisdale

Joined
Apr 11, 2014
Messages
469
Likes
472
Location
Dallas, TX
Finally got'r done. Ingredients:
  • a standard Hunter round shank #1 retro
  • standard Rolly Munro link
Drilled a 3/16" hole in the thru-hole side of the link, cut off the threaded end with a dremel, ground it down a bit and CA glued the Hunter retro.

Went to this extreme due to hollowing lots of seriously wet koa - will probably use it on other logs too.

Hunter #1 on Rolle Munro.jpg
 
I love the Hunter #1 for hollowing. I have a small version I made for hollowing ornaments and it's spectacular.
 
You must log in or register to reply here.
Back
Top