-
December 2025 Turning Challenge: Single Tree! (click here for details) -
Congratulations to Bob Henrickson, People's Choice in the November 2025 Turning Challenge (click here for details) -
Congratulations to Guillaume Fontaine for "Old Tea Pot" being selected as Turning of the Week for December 15, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Inexpensive texturing tool
- Thread starter Webb Willmott
- Start date
Lance Mirrer
AKA "taxman"
Search for Knurling tools. There are many very reasonable varieties that produce different patterns.
My texturing tool cost $5. https://www.harborfreight.com/6-in-grinding-wheel-dresser-71274.html
And the pneumatic one was $40. https://www.harborfreight.com/compact-air-needle-scaler-58646.html
And the pneumatic one was $40. https://www.harborfreight.com/compact-air-needle-scaler-58646.html
I haven't see it. Reviews are mixed. What I don't like is it's basically a spiraling tool and doesn't come with the pointed start wheel. I have several spiraling tools but use the point wheel far more. Depends on what you make and what you like.
The I don't see the shaft diameter in the description of that tool. A star wheel from another source might fit.
Be aware that some have reported losing the fastening screw when it loosened; too tight and the spiraling wheel wouldn't spin. A dab of blue locktite on the threads might help.
Spiraling on disk:
Texturing with the pointed star wheel on spindles. More fun, I think!
Nice for a tool handle too.
JKJ