Jim Shuler

[Jim Shuler]

Entering the turning world after 63 years.
Came across a neglected 1985 shopsmith lathe in a garage clean out. Spent about 10 hrs going slowly getting everything back up to snuff, cleaned lubed, adjusted.
Got the bandsaw, router, drum sander,
She runs good so now off to learning to turn wood. What to get into wood and resin turning as well.
So here to learn all I can

 

[Marvin Jones]

Welcome Jim, You've come to the right place. The folks here freely share knowledge, has helped me tremendously.

 

[Charles Cadenhead]

Welcome Jim!
Check out and join your local AAW group. The first one is free! You can use the AAW lookup tool to find your closest chapter: https://www.woodturner.org/Woodturner/AAWConnects/AAW-Connects.aspx
Find a mentor
Take classes (check your local woodwork store like Woodcraft or Rockler). Your local AAW chapter might be offering demos and classes too.

 

[Jim Shuler]

Charles thanks for the reference on local chapters. Did not know those existed

 

[Bill Boehme]

Welcome to the AAW forum, Jim.

 

[Emiliano Achaval]

Welcome to the forum! I also would recommend looking for a chapter club in your area. Clubs are starting to have in-person meetings again. Perfect timing!