The online lathe specification matrix has just been updated. Links to most of the lathe manufacturer's sites have been added, and a few other tweaks made. Here's the direct link.
-
March 2026 Turning Challenge: Olla! (click here for details) -
Congratulations to David Wyke, People's Choice in the February 2026 Turning Challenge (click here for details) -
Congratulations to Dave Bell for "Torus Teapot" being selected as Turning of the Week for March 9, 2026 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Lathe Specs - update
- Thread starter Ed Davidson
- Start date
Steve Worcester
Admin Emeritus
Wow, very nice. Didn't even know we had one.
Hey Ed:
I think the Oneway 2016 has a 20-inch swing, no? Just one correction that should be made on the next update.... An excellent resource - I'll be linking to it on my web page.... Thanks!
Rob Wallace
- Joined
- Sep 11, 2007
- Messages
- 2
- Likes
- 0
Thanks Ed
For helping me keep the list up to date and I made the 2016 correction on my list and will be adding more lathes as I get them. Thanks Walter
For helping me keep the list up to date and I made the 2016 correction on my list and will be adding more lathes as I get them. Thanks Walter
Sears lathe update
Sears monotube (2") lathe has a tool post diameter of 7/8".
Swing is slightly over 12" (Height of the headstock spindle to tube top is about 6 1/8").
bernie feinerman
Sears monotube (2") lathe has a tool post diameter of 7/8".
Swing is slightly over 12" (Height of the headstock spindle to tube top is about 6 1/8").
bernie feinerman