• It's time to cast your vote in the April 2025 Turning Challenge. (click here for details)
  • Congratulations to Steve Bonny for "A Book Holds What Time Lets Go" being selected as Turning of the Week for 28 April, 2025 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Mesquite wet/green

Status
Not open for further replies.
Chuck Scott

Chuck Scott

Joined
May 16, 2020
Messages
13
Likes
2
Location
Mooresville, Indiana
In search of members that have or have access to some fairly recently cut mesquite. The size desired is 3x3x17. The corners and/or edges can be pretty banged up since quite a bit will be turned down for the project pieces.

If you're for hire to turn, that's even better, that will cut down on shipping weight.

Just looking for a pair or two at this time.

Thank you,
Chuck

Here are a couple images of the turned project -

pair.jpg


drawing.jpg
 
Status
Not open for further replies.
Back
Top