I got to the point I could start gluing segments today. 18 segments a layer, sassafrass as the background wood, black walnut and yellowheart for the feature pattern. More later.
-
November 2025 Turning Challenge: Wall Hanging! (click here for details) -
Congratulations to Craig Morton, People's Choice in the October 2025 Turning Challenge (click here for details) -
Congratulations to Andy Chen for "Mesquite Vase with Polymer Clay Millefiori" being selected as Turning of the Week for November 3, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
My first open segment
- Thread starter Gary Beasley
- Start date
I got to the point I could start gluing segments today. 18 segments a layer, sassafrass as the background wood, black walnut and yellowheart for the feature pattern. More later.
So far so good
I’m convinced that segmenting requires magic.
Kind regards,
Rich
Kind regards,
Rich
If you define magic as patience and watching the details, yeah. Start small and easy, every time you do one it gets easier.
Every time you do one it also gets bigger.
And today I finished it. 7 3/4” tall, 12” wide, 1/2” wall. Mounted the solid top ring, turned the inside, then the outside, sanded and sprayed, reversed it and finished the bottom and sprayed varnish.
Congratulations!! Nice job Gary.
Thanks! Not bad for a beginner.
Absolutely gorgeous. Can't wait until I'm at that level, which is probably many years (and catches!) away.
Actually the hardest part was planning the cuts out. Once I got to the point of cutting it was a matter of following the plans cutting and gluing. The turning wasnt to bad either with a bowl gouge that had an irish grind to it. Since the turning was all side grain except the base it cleaned up pretty easy.
Gary, do use a jig to cut segments. After 4 years making segmented bowls with test cuts I discovered the wedgie sled (http://www.segeasy.com) and that made life a lot easier. I plan to do an open segment piece soon and I was very interested in your story. Cheers.
Oops. Stupid question. Looking back through your pictures I saw the answer.