I recently bought an old Brodhead-Garrett J-line J170 and then realized it has an odd spindle size- 1-1/8 x 8tpi and I can't even find an adapter for it. Any info, ideas or does anyone have equipment to fit they'd be willing to part with.
-
Beware of Counterfeit Woodturning Tools (click here for details) -
Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details) -
Congratulations to Keven Jesequel for "Big Leaf Maple" being selected as Turning of the Week for April 15, 2024 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Need chuck/face plate for 1-1/8x8tpi spindle
- Thread starter Dave Green
- Start date
- Status
Hopefully you can find someone with a few extras, but if not,
I've bought a few things from this guy over the years, quality stuff...
Faceplates
And under special order, spindle adapters
If you're a DIY, there is always McMaster Carr
www.mcmaster.com/nuts/hex-nuts/thread-size~1-1-8-8/
I've bought a few things from this guy over the years, quality stuff...
Faceplates
FACE PLATES
bestwoodtools.stores.yahoo.net
If you're a DIY, there is always McMaster Carr
www.mcmaster.com/nuts/hex-nuts/thread-size~1-1-8-8/
This is perfect. really helpful! Thanks so much, Dave
I've seen 1 1/8X8 adapters and faceplates at our high school, which were used on lathes no longer present. Maybe an Oliver. Don't give up your search, you may just not have tried the right place. Nova has an adapter for their chucks, for example: https://www.teknatool.com/products/...huck-insertadaptor-1-18-8tpi-unc-rh-sku-i7ns/
- Status