Sometimes when I use my negative rake scraper, esp. on spindle work I get light tear out on the end grain of the spindle. If that happened to you what did you do to correct it? Thanks for the feedback. Be safe.
-
August 2025 Turning Challenge: Wooden Version of Non-Wood Item! (click here for details) -
Congratulations to David Croxton for "XOXOXO" being selected as Turning of the Week for August 11, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Negative rake scraper
- Thread starter Dave Fritz
- Start date
Well, scraping cuts on spindles generally don't do as well as a bevel rubbing cut. I can get a cleaner surface on most spindles by using a peeling cut than I can with a scraper or bevel rubbing cut (either SRG or skew). Other than that, if you have very hard wood, and a fresh burr on your NRS, it should cut fairly well. I still would want to do a peeling type cut for a better surface. I do prefer a burnished burr to the grinder burr on my NRS.
robo hippy
robo hippy