• Turning of the Week -- May 23, 2022

    Congratulations to Mark Wardle for Carved Redgum Bowl being selected as this weeks TOTW!

    CLICK HERE for all the details.

  • May Turning Challenge -- Turn Something with Metal!

    Click HERE for further details.
  • April Turning Challenge Winner!
    Congratulations to Bruce Kerns, the winner of the April Turning Challenge, Turn an Easter Egg
    CLICK HERE to see the final voting results.
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Nichols Lathe

Status
Not open for further replies.
Joined
May 12, 2012
Messages
11
Likes
4
Location
Lancaster, PA
Website
www.richardcarner.com
Description:
1. @42” swing over gap and @36” over the bed.
2. Replaced headstock with a solid 2” piece of high carbon chromium steel. The spindle size is 1.5” x 8tpi.
3. Maximum bed extension @52”
4. Motor: Leeson 2.0 H.P. 240 volt.
5. WDC Variable Speed Control (replacement)
6. Nichols-built 18” diameter steady rest.
7. Heavy duty castors and screw jacks.
8. MT2 tailstock with heavy duty ball bearing fitting.
9. Crane/winch for mounting heavy pieces.
10. Accessories on table self-explanatory.
11. View attachment 44586View attachment 44589Included but not photographed are a Jim Thompson telescopic hollowing out tool (1” diameter) purchased at the 1985 wood turning conference at Arrowmont. Also, a custom made 2” x 2” x 88” hollowing out tool with support stand. Image attached. And a 12” x .75” faceplate for the big stuff.
Pickup only. Location – Lancaster, PA. Asking $5,200.
12. Repainted lathe. Hate green.
 

Attachments

  • 1.jpg
    1.jpg
    195.9 KB · Views: 119
  • 2.jpg
    2.jpg
    221.3 KB · Views: 115
  • 4.jpg
    4.jpg
    210.7 KB · Views: 115
  • 6.jpg
    6.jpg
    217.9 KB · Views: 113
  • 10.jpg
    10.jpg
    200.2 KB · Views: 111
  • 12.jpg
    12.jpg
    183.5 KB · Views: 108
  • 14.jpg
    14.jpg
    156 KB · Views: 103
  • 16.jpg
    16.jpg
    228.1 KB · Views: 99
  • 18.jpg
    18.jpg
    248.4 KB · Views: 106
  • 019.jpg
    019.jpg
    335 KB · Views: 112
Status
Not open for further replies.
Top