Can a Nova DVR user tell me if it is possible to lower the speed below 100 rpm? Seems with the electronics it should be possible. For some sanding I'd like to slow way down.
Thanks.
Thanks.
-
Congratulations to David Bartell, People's Choice in the March 2026 Turning Challenge (click here for details) -
Congratulations to Chris Lawrence for "Dragon's Grip" being selected as Turning of the Week for March 30, 2026 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Nova DVR speed
- Thread starter Wells Jacobson
- Start date
Not on the DVR-XP (almost 10 years old) I have
Disappointed. Bad planning at the manufacturing end for something quite basic. Thanks for the response.
- Joined
- Apr 27, 2004
- Messages
- 9,334
- Likes
- 6,159
- Location
- Lakeland, Florida
- Website
- www.hockenberywoodturning.com
You might contact Technatool.
http://www.teknatool.com/support/index.htm
They have a support center in Tampa and they have supported the local clubs
They might have a solution and are certainly interested in solving problems.
http://www.teknatool.com/support/index.htm
They have a support center in Tampa and they have supported the local clubs
They might have a solution and are certainly interested in solving problems.
Thank you. Will do.