• Beware of Counterfeit Woodturning Tools (click here for details)
  • Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details)
  • Congratulations to Paul May for "Checkerboard (ver 3.0)" being selected as Turning of the Week for March 25, 2024 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Pair of Forged Spindle Gouges

Status
Not open for further replies.

Angelo

President Emeritus
Joined
Jun 14, 2004
Messages
399
Likes
110
Location
Lancaster, Pennsylvania
Website
www.majicbrand.com
These are two Henry Taylor forged spindle gouges. As I understand it, they are drop forged from flat stock as opposed to milled from round stock. The larger gouge has a cocobolo handle and the smaller one has a kingwood handle'
The larger gouge has a blade length of +/- 6" it is +/- 11/16" (out to out not measured in the traditional manner). The handle is +/- 10.5" long.
The smaller gouge has a blade length of +/- 5.25" it is +/- 1/2" (out to out not measured in the traditional manner). The handle is +/- 9.5" long.
The larger Gouge lists for approx. $75. I am guessing the smaller gouge would list for $50. I am asking $70 for the pair plus USPS within the US.

2 forged spindle gouges close up.jpg

2 forged spindle gouges.jpg
 
Status
Not open for further replies.
Back
Top