• Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details)
  • Congratulations to David Croxton for "Geri's Basket Illusion" being selected as Turning of the Week for February 2, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

palm or palmetto

Turning Palm or Palmetto

A lot depends on what you want to turn. Finials, bottlestoppers and other small items aren't very difficult if you're able to use the outer section of the trunk. The outer section of the trunk of most palms is the hardest and easiest to turn. The inner sections can get very soft and punky but it depends on the species of palm. If you want to turn a bowl or platter and you have a very soft section of the inner part of the palm, I have used several coats of Minwax Wood hardener to toughen up the tenon to grab in a chuck. I also have used CA glue on the tenon. You may also want to coat the inside of the bowl with wood hardener when you get to about 3/4" thickness. Sharp tools and light cuts are critical. Palm tends to be very abrasive and dulls tools quickly. The results can be spectacular!
Tim Carter
 
You must log in or register to reply here.
Back
Top