• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • Congratulations to Bernie Hyrtzak, People's Choice in the January 2026 Turning Challenge (click here for details)
  • Congratulations to David Croxton for "Geri's Basket Illusion" being selected as Turning of the Week for February 2, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

pepper mills dimensions

Dave Fritz

Dave Fritz

Joined
Jul 24, 2008
Messages
764
Likes
222
Location
Montfort, Wisconsin
I'm curious what measurements you strive for when making peppermills? I'm speaking of the greatest and smallest diameter, not the height.

It seems the taller the mill the harder it is to get a pleasing ratio between the largest diameter and the smallest diameter without making it too big for my wife to grasp.

Thanks for your help.

Dave F.
 
Thanks John. The link you provided still shows the top as 1 3/8 inch. Do you mean someone wrote the correct measurements on your copy?

Thanks again for the reply.

Dave F.
 
Last edited by a moderator:
It's a good question, Dave, to which there's really no fixed answer (at least none that I've found satisfactory.) It goes back to the old saw about beauty being in the eye of the beholder, etc. But within that context, my most popular pepper mills are about 8" tall with a 3 - 3-1/2" diameter base and a 2-1/2" diameter top. But that's only part of the equation because pepper mills are held in two hands - one supporting the weight of the mill while the other turns the handle that drives the grinding mechanism. Therefore what I'd call a "good" mill must be proportioned so that the hand supporting the mill's weight isn't strained. The best way I've found to do that is to apply a "fair curve" to the mill body while laying a bead at the top to act as a "stop." That not only adds aesthetic appeal, but serves to keep the supporting hand in place. Since it sounds like you're making a mill for one person (your wife) you can (and should) vary the dimensions to suit her taste.

Anyway, by following that guideline, I've found it possible to make mills ranging from 7 - 8" tall all the way up to 18"+.

You can see some examples by going to the pepper mill section of my website.

Please feel free to reach out directly if you feel I can help.
 
Last edited:
You must log in or register to reply here.
Back
Top