• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • February 2026 Turning Challenge: Cookie Jar! (click here for details)
  • Congratulations to Matt Carvalho for "Red Mallee Folded Form" being selected as Turning of the Week for February 9, 2026 (click here for details)
  • AAW Symposium demonstrators announced - If the 2026 AAW International Woodturning Symposium is not on your calendar, now is the time to register. And there are discounts available if you sign up early, by Feb. 28. Early Bird pricing gives you the best rate for our 40th Anniversary Symposium in Raleigh, North Carolina, June 4–7, 2026. (There are discounts for AAW chapter members too) For more information vist the discussion thread here or the AAW registration page
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Some time in the shop...finally.

John Torchick

John Torchick

Joined
Jan 24, 2010
Messages
3,193
Likes
970
Location
Cleveland, Tennessee
I'm building fly rod for my grandson's birthday this month. Finished the cork grip and had to make a couple of things for drying the epoxy that covers the thread wrappings. Came up with this idea. The motor is a microwave turntable motor. The part with the rubber bands was drilled and turned to had a friction fit over the shaft. The end of the grip with fit there . The other part goes into the rubber bands for the tip section. Most tips are about 1/4 inch or bigger. A few wraps of Teflon tape will give a good friction fit. Motor will run continuously for 10-12 hours, generating a bit of heat. Have had these before and they create no problem. The mounting keeps heat to minimum.IMG_6683.JPG
 
Definitely but a rotisserie turns a bit too slow IMHO. I did look at them. However, rod builders will fight over a microwave left at the curb. Most of the time, all that is needed is a fuse. Got another motor coming to make a wrapping motor for wrapping thread.
Might even play some Wrap Music. o_O
 
Wife has an old sewing machine. Too touchy to control at one speed, IMO. Prefer a constant speed motor that can run continuously for 10-12 hours for drying. I have an old sewing machine motor that I'm looking to convert to a wrapping unit. I could drill a hole with a screw and nut to act as a stop to keep a constant slow speed. Some wrappers go fast but that is for skilled builders.
 
Great idea John, nice job......My wife and I use to fly fish all the time and loved it til arthritis got into our shoulders....:D
 
You must log in or register to reply here.
Back
Top