This video describes the production of this unique South West Pattern Woodturning. Trapezoid shaped wedges of Yellow Heart wood were cut on the band saw using the Accu-Wedge system on the band saw by tilting the band saw table to 110 degrees. These were then glued into a segmented disc with thin padauk spacers between each of the wedges. The trapezoid shaped segmented disc was subsequently sliced again on the band saw to produce 0.120" thin segmented discs. The order of these disc was reversed to create this unique pattern. Finally additional segmented discs were produced to complete the design of this bowl. A curly maple segmented disc was made for the top rim of the bowl and a segmented feature ring from a previous video was used as the center piece in the bottom of the bowl.
View: https://youtu.be/608neJQfYiQ
-
Beware of Counterfeit Woodturning Tools (click here for details) -
Johnathan Silwones is starting a new AAW chapter, Southern Alleghenies Woodturners, in Johnstown, PA. (click here for details) -
Congratulations to Keven Jesequel for "Big Leaf Maple" being selected as Turning of the Week for April 15, 2024 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
South West Pattern Segmented Wood Turning
- Thread starter John Manura
- Start date
Very enjoyable video. Thanks for sharing!