I had this (honey locust IMO) in the garage for at least 25 years so decide to make a platter. It is about 12” and ¾”. The gain pattern was not (to me) that visible before turning and I did not expect it to have this grain. I “remade the board to show original what I am guessing now was the branch section close to the main truck. Finished with three coats of tried and true oil.
-
July 2025 Turning Challenge: Turn a Multi-axis Weed Pot! (click here for details) -
Congratulations to James Seyfried for "NE Red Oak II" being selected as Turning of the Week for July 21, 2025 (click here for details) -
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Surprise Grain in Honey Locust
- Thread starter BobCoates
- Start date
Russ Braun
TOTW Team
After 25 yrs, I’d be shouting for joy just like this beauty is Bob!
I've encountered that grain pattern with honey locust as well. Wish I could remember how I cut up the log to achieve.
I didn't cut it but from the looks it was the first (or second) slab from the tree to get rid of the branch.
It looks to me like the pith line runs obliquely through the blank, i.e. from the bottom on the left side to the top toward the right.