• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • It's time to cast your vote in the February 2026 Turning Challenge. (click here for details)
  • Congratulations to Gabriel Hoff for "Highly Figured Masur Birch Round Bottom Box" being selected as Turning of the Week for March 2, 2026 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Teknatool 'Nebula' Lathe SOLD

Status
Not open for further replies.
John Grace

John Grace

Joined
May 9, 2023
Messages
257
Likes
175
Location
Baltimore, MD
  • 18” overswing
    • Bed extension included
    • Cast iron legs w/levelling feet
    • Sturdy steel shelf bolted directly to cross-member
    • Original manual included
  • ‘Striatech’ motor
    • Belt free motor (NO belt changing)
    • Remote control switch
    • Currently wired for 220v (2HP) but can also be switched to 120v (1.5HP) by simply changing the plug
    • No internal wiring changes needed…the motor knows and adapts to the electrical feed
  • Accessories included
    • 10” tool rest & ‘S’ rest
    • 5” face plate
    • Large live center
    • Hand wheel
    • Head and Tail stock alignment tool
  • You will need help loading machine
If you plan to do ‘vacuum chucking’, I have a custom-made vacuum chuck adapter that fits the outer spindle of the headstock in lieu of the hand wheel.
 

Attachments

  • one.jpg
    one.jpg
    286.2 KB · Views: 60
  • three.jpg
    three.jpg
    126.9 KB · Views: 60
  • two.jpg
    two.jpg
    183.7 KB · Views: 60
Status
Not open for further replies.
Back
Top