• The forum upgrades have been completed. These were moderate security fixes from our software vendor and it looks like everything is working well. If you see any problems please post in the Forum Technical Support forum or email us at forum_moderator (at) aawforum.org. Thank you
  • It's time to cast your vote in the March 2026 Turning Challenge. (click here for details)
  • Congratulations to Chris Lawrence for "Dragon's Grip" being selected as Turning of the Week for March 30, 2026 (click here for details)
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Thread Chaser

R

Roger Domina

Joined
Apr 12, 2018
Messages
51
Likes
47
Location
Newburgh, IN
I'm looking at the Thread Chaser's designed by Mike Mahoney, i.e. the 12 TPI and 16 TPI. Was wondering if anyone has used the 12 TPI and if so you're thoughts on this one vs. the 16TI? Or neither of these?
 
Depends on the species of wood and diameter of the piece you use. Hard dense wood will work fine with the 16, but courser woods work better with the 12. Chipping short grain is really disheartening since the piece is usually near final stages when you cut the threads.
 
You must log in or register to reply here.
Back
Top